What Have You Done To Your 3rd Gen Today?

Could be these: https://www.tacomalifestyle.com/col...turn-signals-2016-2020?variant=36035211690136

 

Yes the turn signals are Tacoma Sequential Turn Signals from Tacoma Lifestyle

 

What model case is that please?

 

And some punk band already has
The collective, cyclic, throttle, pedals as their name

 

I have the same setup. No lens though. Not needed.

 

I have a set of hella sharp tones, they were supposed to be the hella super tones. Sharps sound like a Subaru, and that’s not what I want. The supers are in the mail. I looked it up on YouTube to listen. Lots of subies with new horns

 

DMM is a great product. I put a piece of heat shrink on my "stem" to blackout the silver.

 

Latest is the door overlays. Tailgate is debadged and has the inserts.

 

Th

Thx! would you happened to know if these have a built in resistors?

 

I have no Idea just plugged them in.

 

They don't hyperflash, if that's what you're getting at

 

The factory turn signals are LED so no resistor should be required. As mentioned, they are plug and play

 

I’m aware of this. But with the meso total tails stage 2 or 1’s “some” have hyper flashing while in reverse. I had the meso version and it fixed this. I recently replaced it with Amazon version and the HF’ing came back.

 

The Rotor Heads?

 

fair enough. I have Stage 1 total tails and use the same Tacoma Lifestyle sequential turns and have hyperflashing in reverse with blinker on. I don't ever parallel park or have any other need for a blinker on in reverse so it's a non issue to me but good point!

 

Cool. I might open up the meso ones and see what’s in there. I’ll transfer the “resistors” into my Amazon ones and see if it works. Might ruined both. if so I’ll get these ones from Tacoma life styles. I keep saying I don’t care for the HF in reverse but when I do use it (coz I’m so good at parallel parking)…my ocd kicks in.

 

These are due out at the end of the month: from @MESO: https://mesocustoms.com/collections...witchback-turn-signals?variant=19468276662385

 

Hoping this week

 

I love the garmin mini! It was a little tricky finding the perfect placement so the mirror could still be adjusted, but now it is perfectly behind the mirror and low key with no cables. Using power from the rear view mirror with a splitter.

 

Installed DDI seat jackers with the front mounting plate (holding fire extinguisher, headlamp, fixed blade knife)