Show off your wheel/tire setup!

Pro comps on Wildpeaks

 

285/70/17 General Grabber AT on Fuel Trophy.

Came with the truck, can’t complain at all. Eyeballing some Fuel Block’s in all black though…

 

Method 305NVs with 285/75R16 Yokohama Geolandar MT's

 

mmmmm

 

Icon vector 6 17x8.5 on Falken Wildpeak AT3W’s 265/70/17

 

Motegi MR149 16x8 0 offset on 245/75 Wildpeaks. Great light 21lb wheel. Ready for the inevitable...bigger tires and a lift

 

Love the wheels!! In the same boat - got some MR149’s on mine until I get 33’s

 

I finally got my training wheels off after 5 1/2 years. I just finished my lift with new wheels and tires! I couldn't have done all this without first my wife lol, and then to everyone in this forum! A big thanks to everyone and this community! I ended up going with the bilsteins 5100s with a 1 inch block in the back to keep the slight rake. I was going to get the ko2's in 275 70 17 but they weighed around 6lbs more per tire than the larger 285 70 17s, so I went with the latter. I had to go with a cab mount chop as everyone already knows, but it was completely worth it. The company I went with is in OKC and they did a great job with all the cutting and they welded on a plate after chopping the cab up a bit to give it a more finished look. I couldn't be happier. I also waited around 3½ months to get the exact wheels I wanted, which were the SCS BR6 Gunmetal in a 17x9 -10offest. Ridiculous to have to keep checking their Instagram to see when they would post their inventory, especially when I dropped all my social media accounts roughly 10 years ago. Anyway,
I wanted the wheels to sit just a bit outside the fender and to me, it all fits perfectly. I also got around 3 inches of lift with the tires and bilsteins. I didn't have to go with a new UCA yet or a regear. Maybe something I'll consider down the line, but everything runs and looks as it should.

 

Just installed our new 285/70R17 tires (Milestar Mud Terrains) on our Method Race 17" 305 NV Bronze rims. 2,400 miles on the truck.
We are still waiting for the Fox 2.5 front suspension components to arrive. So we are currently running these 285/70's with no lift.
My son and I did the Cab Mount Chop (CMC) and pinch-weld fold earlier in the day. Currently, the only rubbing is when turning the wheels in reverse.

New shoes waiting to be installed (the wife was away in Cabo San Lucas when the goodies started showing up ... it was like Xmas).


Testing the bigger tires with the fresh CMC.


Going on a test drive.

 

Sick, are you running a CMC? I'm not sure to use 285/70/17 or 275/70/17. I'm on a TRD Lift Kit 2" front and 1" rear. Using a 17x8.5 -10 wheel.

 

285/70 r17 Toyo Open Country AT3's and 17x9" Fuel Blocks with -12 offset

 

Those Ray 10s look absolutely god awful on your truck, you should sell them to me before anyone ridicules you for having them.

 

285/70 on the new summits

 

265 70 17 Falken Wildpeaks
17x9 w/ -12 offset Rocktrix RT111
2.5” front 1.5” rear lift
No rub no worries!
EDIT: I need to learn to take better photos

 

Hey, thanks very much. Yes, I have a CMC done.

 

I know. Hideous, right?

 

Gen5 or Br6?

 

Gen5…. But you can’t go wrong with either one Imo

 

285/70R17 Ridge Grapplers on 2021 4TR Pro Style FSW Gun Metal Grey 17x8.5 0 offset wheels

 

those look awesome. Where did you get them from?