What Have You Done To Your 2nd Gen Tacoma Today?

No bulb. They use led projectors.
I just need to play with the alignment a tiny bit more and it’ll be perfect.

 

just a little past due for the first time at 238,478 miles, I flushed out and filled the brake fluid on my '07. Also sucked out the power steering reservoir and refilled.

 

Cut some sheet metal that was sticking out past the cab mount then took it out and stuffed the tires...still rub...catching the corners of the bumper cover, fender flares, and fender liners.

 

Those look great! Makes me want to do the 2.5 front end conversion too.

 

Installed rear limit straps today. Gotta order new front straps. Compensated for stretch... twice

 

4.88 gears, on board air, and front locker. Ready to wheel the shit outta my rig.

 

Winter prep

 

Got photos of your mounting points? Bout to put some straps on the rear of mine too. Just looking at ideas

 

Bulkhead fitting for my fridge. I like to run it off of 120v as I’m prepping for a trip and this makes that a bit cleaner looking.

 

Added stickers...

 

Today I installed a new to me tonneau cover, I've been looking to get one for a while and finally found one at a reasonable price and in pretty good shape this afternoon.

 

Dude, those headlights looks sick (noting it down as a potential upgrade on my taco).

 

ill snap some pics tomorrow

 

Thanks brotha

 

Attempting a CMC

 

Cut deeeeeeper!

 

shit… that’s what I was worried about. I guess better to cut too little than too much. And this is only for 255/85/16 that’s rubbing now with my wheel spacers on stock wheels. Only rubs off road. Work will resume tomorrow. You think I should cut a significant amount more, or just a little bit? Watched some YouTube and looked at some threads here, but.. still got scared.

 

Just realized your on BI. Howzit from a fellow Maui boy now in Florida. Honestly, if you don't plan on moving up in size than you should be solid. Little bit more wouldn't hurt. Are you plating it? If so just angle your plate too. When I cut cab mounts for customers I angle the cut back if you know what I mean. Hang on let me find a photo

 

What’s the part number for this green plastic tabs that are 4 for the front bottom speakers. Thank you!

 

I strarted building a platform that will eventually be a heat deflector I will keep on when I'm not using my Roof rack for anything