What Have You Done To Your 3rd Gen Today?

Here you go.
87961-42D20 & 87931-42D50

$123 Genuine Toyota 2014 & Newer 4Runner Blind Spot Side View Mirror Glass Conversion 87961-42D20 & 87931-42D50

https://www.amazon.com/dp/B086XK3SGX?ref=ppx_yo2_dt_b_product_details
Bought from here

 

What is the benefit to swapping out the screws?

 

Purely aesthetics - in search of the total elimination of chrome.

 

This ^^^^

 

Raptor lights in my stock ‘21 OR grill. Fog white look good. Slightly nervous about add a fuse in the INJ, but seems like people haven’t had issues.


Also, diode dynamics interior LEDs make a huge difference:

 

Let us know if you have any further questions!

 

does that seat pad thingy have a name? looks like the perfect non-obtrusive seat cover for when I'm sweaty post cycle

 

It is the "Sojoy IsoTowel Car Seat Cover" -- just a cheap from Amazon that has been extremely useful. I just throw it on after mountain bike rides. It's also machine washable.

 

Took her to the Blueridge Parkway, and she liked it.

 

No fairly straight forward install. The bolt set up is different than the R4T Video on YT. Bushings are now aluminum vs. plastic.

 

Hacked the horizontal ears off my Total Chaos bed stiffeners. They didn't add any tie-down functionality I'm going to miss, but they definitely jabbed hard into the side of my Exped Megamat Duo mattress.

 

Looks nice, is it lifted?

 

What is your concern with the Add -a-fuse?

 

Well, didn’t really do anything to the taco, but after three months of waiting we finally took delivery of our new jumping jack tent trailer/toy hauler. I’ll have to set it up, but we’re super pumped to get out with it!

 

Pulled all of the rubber mats out of my cars and cleaned them with Adam’s Rubber Mat & Liner Cleaner.




I’m not sure I knew those mountains were on the mat.

 

You may need to relocate the pulley. All you do is unbolt it, move the front bolt hole on the pulley to the rear bolt hole on the truck, mark where the new hole should be and drill a new rear bolt hole.

I'm running 275/70R17 and bought another matching rim and the same size tire so I have 5 of the same tires/rims.

 

I didn't know the Pro mats were different ... I kinda like those.

 

Better tread pattern than the factory Pro tires.

 

Yep that'll work, until the bungee gets old -or- MN winters gets to the rubber core!
Just get two carriage bolts, file a flat on two sides of the head, and slid them into the bedrails. Add a nut to hold the position, then a spacer (if needed). Put your trax on the bolts -using the lower holes- and hold w/ a washer, spacer, & wing nut. (I do have a locking cable at one end for security. The other cable in the photo was an experiment; it's gone now.) I also mounted mine to the front bedrail, and I run a ST.

 

Only I could screw up taking the air dam off lol. Took like 2 hours because the screws got stripped. Demon rings and shackles took 5 minutes