What Have You Done To Your 3rd Gen Today?

Installed the TRD air filter and TRD intake flow accelerator

 

Went from 275's to 285's, got a canopy, and traded my old wheels for some SCS BR6's. Now time to order some AAL so the rear can hold the canopy weight and my camping gear without sagging. Any suggestions? Right now I only have a 1" block in the rear

 

Love the stance

 

Currently we only offer parts powder coated

 

Installed a bumper and was a bit nervous having to cut into it in order to install it. I guess it fit just right in the end.

 

first wash and wax for my truck, it takes a lot longer than my other cars for sure

just a good old wash with meguiars 3 in1 wax

 

I installed the smoked sequential turn signals from TacomaBeast today. Super easy install, took maybe 5 minutes total. I don't have a build thread on here yet (I've only had the truck about 2-3 weeks) but I recently made an Instagram with what I've done so far if anyone wants to check it out. I'd appreciate any feedback or follows!

@nc_inferno_taco on Insta. So far, parts installed have been from Tacoclout, TacomaBeast, MESO Customs, Cali Raised Offroad / LED, and random items found on Etsy. I have Cali Raised sliders from TacomaBeast, some new black housing headlights from Extreme Terrain, some cab decals from Supdec, and some rock lights from YotaMafia enroute. Will post updates here as things come in.

-Red

 

Before:


After:


And bought these today at 10% Off!

 

Homemade…
It’s just some scrap steel. I used a couple of pair of quickfists to mount the shovel and axe, and the Hondo Garage track nuts to mount them to the truck. Had them on 2 trucks now with no issues.

 

Installed matching amber for the fog lights to compliment the grille lights.

 

NICE!
I'm picking up my MGM DC/LB SR5 tomorrow!
Also noted your G35... mine is a 2003 G35.

 

What does the flow accelerator do? Anything noticeable?

 

I did. 7600 NEX installed. I changed the tweeters first and there was a nice change. Then I put in the HU and all new Hertz speakers as well as deadening in the doors. I'm very happy with the sound system now.

 

Kentuckian. Welcome. Bowling Green area?

 

PlastiDip fender flares to matte black. Applied several coats to increase durability. Lines were perfect after peeling off the overage. I like the look of the OR and Pro flares so this was my fix.

 

The top plate came with the tow hook and the holes were threaded, the middle plate I had made at a local machine shop as a spacer. If you’re looking for a suggestion get the spacer made up and just use a thick washer and a nut to fasten the bolts. I cut away some of the plastic which really wasn’t that difficult there was a bolt through the plastic which was removed. The hole was the correct diameter for the bolts I used so only one additional hole for each hook had to be drilled in the frame. The whole process was really quite simple so don’t get discouraged. I used 10.9 grade bolts as the threaded holes were metric. If you’re using SAE bolts use grade 8

 

Over the moon excited with this awning and very happy!
The brackets are from Rago fabrication.
The awning is the OVS 270LT

 

Also funny decal on my water tank

 

I need more coffee......I looked at that first picture and thought to myself, who the hell mounts a mudflap in front of the tire?......

 

got more starbucks