What Have You Done To Your 3rd Gen Today?

Oh for sure mid rack! That's the route I want to take. My favorite so far has been the UpTOP Overland mid rack.

 

Strongly considered it as well, as they make great products.

Chose the CaliRaisLed because it was lightweight (only weighs 55lbs), coupled with the simulation weight ratings they published:
Running the simulation for 1000lbs on a 53" extrusion supported on each end. Our bed rack mounts them in the Deflection Y configuration. This is 1000lbs applied to a single bar at the weakest point in the center and it shows a deflection of 0.195" and no failure.

 

Nice and much cheaper.. Tractor supply? All I see is bed mats. Assume you cut to size?

 

What jack is that?

 

i love it! the stock white i would always just keep off but now i have the lights set to turn on with the doors opening and it doesn’t bother me.

 

In anticipation of getting the new AJT radio knobs (mine will ultimately be Army Green), I popped the prototypes on to get a full shot. I originally switched to the RAV4 knobs but like the AJT design even more.

 

Notice any difference?

 

Your magnet phone mount is gone.......My magnet got loose after a rough dirt road adventure. Had to add Loctite to the screw that holds the magnet tight.

 

I'm actually using the mount itself - just switched out the magnet for this holder. It was a combination of my phone being so large that it would rotate on the magnet while driving and the fact that the steel plate prevented using a Qi charger.

 

Didn't do anything today, but watch this video from Twitter. It's one of my nightmares....

https://twitter.com/CeasarSolid/status/1434857385051496449

 

My kid works at walmart and was complaining about pushing carts. I need to show him this! Yikes..

 

Bought and installed some lightly used Predator steps from a friend for $250...

 

After I posted that Twitter video, at first glance at your post, I thought those reflections were scratches. WTF is wrong with me today?

 

I’ve been messing around with this to this (star wipe) and now

 

What is this tool called?

 

That’s a gold sharpie. Black won’t show very well on the bed. But yes marijuana is legal here in California.

 

No HP gains but noticed better throttle response

 

It's like one of those trick photos.. "now I see the sharpie"... LOL.

 

Yes it would.

 

I did basically the same thing. I used a stall mat that my dad had laying around since we sold the farm. It’s about an 1” thick and I cut it to fit.