What Have You Done To Your 3rd Gen Today?

What projectors are you going with? I haven’t been serious enough yet to start buying parts but last I looked I was getting curious on the mled and how that install would be

 

Mains will be D2S 5.0's and others are HB Led's. Meso had Mled's and said they in his top 3 choices. My current set has RX350'S but they are getting hard to come by.

 

Installed the KDMAX performance tune and WOW what a difference it made. No more gear hunting and awesome throttle response.

 

thats the impression I have as well, more just concerned with the actual fixing part as pretty much all fixes require going to Montana or waiting for them to do a cross country fix trip.

either way, not genuinely worried, just cautious hah

 

2 windows, nothing stolen… smells like an enemy or disgruntled ex

 

Thanks, I found it and I do think that would work just fine. 2" wide and 1/8" thick, perfect. Now I just have to actually talk to someone from Toyota Corporate to verify they intend to do nothing for me and this issue before I tackle it myself. I have put in many requests for my Caseworker to call me and all I get is crickets......

 

Could be Dirty Mike and the boys

 

Started out wanting to put on the tailgate letters but have a need to be extra so the tailgate got some love. Clay, da compound/polish, (insert letters), then ceramic spray coat and c4 on the handle.

I only went down to a light cutting pad and it got most of the scratches (that you literally can only see if your 45 Degree angle in the right light). If I dried out the pad after cleaning I wouldn’t of had any sling (2nd time running the da). Now to start working panel by panel

 

Actually, I initially got the stage 1...Then, I've upgraded the Amber switchbacks to V6 triton...Then, All four V6 extremes reds...Lastly to Amber Switchback V6 Extremes.

 

Thanks to @no vtec 4me & @MESO​

 

Just throwing this out. I use waterproof tape to seal my coax ham radio connections not sure if that's what you need and it works great. Might want to give it a try. Just a thought

 

I am a Ham as well and I do use that on my antenna connections. My drips are caused by condensation forming on the bottom of the cold AC case, not a physical leak they say. So I need an insulating type of tape to apply to that area that is condensing the moisture in hopes it keeps the cold side cold and the back of the tape dry. N5WOI.

 

Couple of installs from this weekend- Got the scene pods and lights in on the rack and installed some S2 sports on the rear bumper. All run to the MESO lower switch panel. Will have the install videos up soon. .

 

Loaded up some Kayaks

 

Nice
Where you place the sticker?

 

Wow, those are niceS do you think they are worth the cost? I see most getting the meso or ajt minimalist. Do you feel it’s safe to not have your key in the fob?

 

I see a number of front camera installs. Why?

 

On top of the air box

 

Installed Diode Dynamics SS3 Sports over the weekend.

 

Anyone know where else to order drivers side spotter mirror replacement mirror because their site shows they are sold out ? Need one with BSM tech package.