rockstar rims size need help to pick offset

I want to get rockstar rims but dont know what offset to get. I want 20x10 -24 offset (backspacing around 4.5") will that work 5100's at max setting and trimming of wheel well and cutting into the body mount. is that all that is need to get me with these rims running 33's? or should i go with 20x8.5 and +10 offset (backspacing around 5.25") ? tires are 33x12.50x20. this is on a 08 pre runner.

 

Braaaah, rockstars?

 

i have the same wheels but mine are 18x9 with a 5.5 backspacing

 

If anbody wants i will sell my center piece for these rims. I have the center pieces because someone stole my new tires and rims. I want to get rid of them.

 

how much u want 4 em

 

i was thinking like 100 buck for all 4.

 

Anyone have this setup? -24 or +10? What is needed for -24 offset?

 

i havw prob comp 3 inch lift with 20's and 33's....the scurb the mud flap but they were riding along the UCA until i got a .25 wheel spacer.....mine are 20x8.5 and that is what you should get but it is your truck

 

here is mine..............

 

braaaah, you're going to be able to fit wider tires way easier with the 4.5" bs, yo.

 

the -24 offset is going to be to much for him. i was having the same prob also

 

the other option, 5.25" BS will sit further in, about where stockers do.

He's going to want the wheel to stick out further in order to fit tires that wide.

 

im kinda confused? What are you saying? I have 33x1250x20 and all that srcubs is o the mud flap but i had to add a 1/4 wheel spacer. my tires stick out past the fender flares

 

What is the rim width, offset, and backspacing of your wheels?


All I'm saying is that in order to fit 12.5" tires, which are 2" wider than stock, you would want wheels that sit out further from the uca than stock.

 

8.5 offset is +10 i forget the backspacing right off hand.

 

So I want a 4.5 backspacing? That's what I wanted to go with anyways. -24 and a wider tire. 20x10 -24 offset 4.5 bs. So if I get this config trimming of shell well and body mount and that's it? Or spacer and anything else to make this work? Anyone with 20's and -24 offset rockstar picture that shows the stance? Thanks guys for your help so far.

 

I have 18x9's with 4.5" backspacing 0 offset and they stick out flush with my bush whacker flares. And rockstars are not douche wheels everywhere. So if you dont have anything nice or constructive to say then don't talk

 

Idk for a fact but you are not going to be able to run 20x10. My friend had that and he could not turn the wheel hardly any with out it scrubbing.

 

4.5" backspacing on a 9" wide rim is -12 mm offset, not zero.

I agree with this. You're going to have issues with 10 wide wheels I would think.

 

thereis no thinking about it lol he is going to have a problem