What Have You Done To Your 3rd Gen Today?

Rough Country seat covers went into the back seat where kids like to make a mess. Now I don't have to be the uptight dad that refuses to even drive by the beach in fear of getting sand embedded into the upholstery.
On a separate note, does anyone know what these side clips are meant to clip to?

 

Mine didn't. It's a 19 trd sport. I installed one though

 

If memory serves, you should have some on the otherside and they clip together to hold the edges down.

 

Time to go to the beach.

 

So I ordered some wheels the other day and got these out on yesterday, just forgot to add. So these are geolandar G003, 285/70/17. With method 305NV 17x8.5. I do have adjustable ELKA front coilovers set at 2.5 amd rear shocks with add lead pack. I did trim and removed the mud flaps, but even with that I’m getting rub on the body mount. So it’s going into the shop next week for a body mount chop. I watched a ton of videos saying you can run 285’s with a 3 inch. But from my experience if your gonna take it off road, do the BMC, not just a trim. I may be wrong, I’m new to this so take my opinion lightly.

 

P-dipped the fenders and badges on my SR5 a few days ago

Installed

$119 Subaru H631SFJ101 - Genuine OEM

Subaru H631SFJ101 Tweeter Kit today



If you're still running stock tweeters, stop.

 

I am running the exact same wheel and tire dimensions and can say, with near certainty that the BMC is mandatory. What UCA are you running?

Beautiful setup.

 

I just went to 285. I rubbed at first. If you have an aftermarket UCA you should be able to increase caster and avoid that rubbing (for daily driving). For off-roading the CMC for sure.

 

I do have aftermarket ones from element, I’ll have to look into that. Thanks for telling me

 

Yours didn't have a hole to place the key in?

 

Drove it to work and got fuel. Which rule do you follow?

 

It would be great if u could catch them and kick their ass so they would think differently About someones hard work and property, and im being nice.

 

B all day! I pulled in a few times to fuel up with anywhere between 0 - 3 miles to empty!

 

Took a 200 mile road trip ...

 

Got my new wheels put on, KMC Summits 16”
With a fallen wild peak atw3 265/75/16

 

I feel your pain…

 

How do you like the PPF? Was it done at the dealer or factory? What parts of the truck did you get covered?

 

Just installed the glass breakage sensor on my 2017, part no. PT398-35160

It’s plug-and-play if you have the OEM keyless alarm, and you don’t need TechStream as the alarm is already set to “on” for that. The instructions also mention to not use Cable V5 if you don’t have a dummy plug on the hood latch- just skip that part though because it works fine as well. Set the microphone to level 8 for starters, it sets off the alarm pretty well when glass is tapped with a key. Remember that the unit does not activate until 30 seconds after you lock the truck.

I purchased mine from here: https://www.toyotapartsdeal.com/oem...ta&Model=Tacoma&Year=2017&Submodel=&Filter=()

 

Installed some Seat Jackers from Desert Does It this afternoon. Feels soooooo much better. My back is going to love these.

 

right. Thats what I was saying. The manual lock is there, but had to the add OEM
power lock.