Mounting Diode Dynamics 30" Light Bar in Bumper?

Can you use the 05-11 Cali Raised 32" hidden bumper light bar brackets for the 30" Diode Dynamics light bar? If not what other solutions do yall have? Thanks!

 

Not sure about the early 2nd gen (05-11) trucks, but the CaliRaised brackets for the 32" CR bar in my 2014 fit the 30" DD bar I replaced it with perfectly.

 

Ok, thanks. I'll ask CaliRaised if they know if an actually good lightbar fits their brackets

 

That would be exactly why I replaced mine.

 

I was thinking up to recent that theirs would be "good enough" but then I figured buy once cry once right?

 

Just to add i have the caliraised hidden brackets mounted to a rough country light bar . No issues

 

To answer my previously asked question yes the Diode Dynamics Stage Series 30" does fit with the Caliraised brackets, just need about a 1/4" of spacers on each side. Actual throw of the brackets is right at 32" and the bar at about 31 1/2"

 

Any more shots of this on your truck?

 

Yes I would like also. Im going to replace my rough country with a DD amber flood bar. Curious to see how the single row looks on a 05-11

 

Here you go I love it!

 

What bolts did you use. I have a way bigger gap on the DD bar. And when i got something to work the light bar is center of the plastic grille. Can’t figure out how yours is a the top

 

Loosen the bolts holding the caliraised brackets onto the frame and slide the light bar up/down.

 

I forgot they were adjustable.. but my passenger side is still slightly lower than the other. I may have to take the brackets off and open the slots by a 1/4 to get the light to sit level

 

That's strange...do you have frame damage?

 

No i even had my frame replaced under the warranty.