Show Off Your Steel Wheels

Did you buy them from Toyota? If so how much did you pay for all 5?

 

$200 for all 5 on Craigslist, too good to pass up!

 

Nice! Those look sweet!

 

Lucky you! Good find

 

A month later, but what wheels are these?

 

Battleborn gatekeeper 17x9 -38

 

TE="singletrack_ftw, post: 26117355, member: 228223"]Battleborn gatekeeper 17x9 -38
Damn that's intense! Please don't ever park beside me lol seriously, that's a sweet truck!




[/QUOTE]

 

[/QUOTE]
Thanks man, means a lot

 

17” FJ Steelies, black lugs.

Truck is a ‘20 OR with a 2/1 level and 285/75/17’s (34x11.50)

 

That is super sweet. Liking the white against the cement. Plus the wheels match the doggo, so you can't go wrong with that.
Any rub with that lift and the 285's?

 

It's got a moderate cab mount chop and 1.25" spacers. It rubbed worse with the TRD Pro 4R wheels because the offset is more aggressive, but it does need the pinch weld smacked flat and the fender liner massaged. Some adjustable UCA's and a better alignment would help. It really only rubs backing up turned hard and hitting a bump.

Long story short, I like the LCG look and I'm not spending any more money on it until I get back from a Moab. It'll get cut up and clearance'd as soon as I decide I'm keeping it.

 

Finally got my steelies installed.
FJ cruiser steel wheels p/n 42611-35330
17 x 7.5 rim +14mm offset
Painted with PPG PSX700 epoxy in Ral 7037 dusty grey

Toyota metal center caps p/n 42603-35610

Falken Wildpeak AT3’s 265-70/17
Stock sport suspension with no wheel spacers.

for reference the stock sport rims are the same size 17 x 7.5 but have a +30 offset

I’ve only had them on for a few hours. No rub so far on the road. But I’m guessing they will kiss the mudflaps with the suspension compressed and wheel near full lock.

 

Wow!!! Ugliest wheels I ever seen….you should sell them to me lol.
They look really nice buddy

 

Thanks. I'm pretty pleased how close a match the paint is to cement.

 

Where did you get the FJ Cruiser caps?

 

I bought center caps for the toyota t-100 off ebay. They're the same thing only cheaper

 

Question for those in the know...

Would the 4runner steel spare wheel be a direct bolt on 17 inch wheel for the Tacoma 3rd gen TRD off road? I've read somewhere that it might require a spacer, which I'd prefer not to do.

I believe the FJ steel 17 inch wheels are direct bolt on replacements (with different lug nuts), but initially at least, they are difficult for me to find.

Ideally the 4runner spares would be a cheap way for me to get an AT 255/80r17 (33) on the truck, as the 255/85r16's are all mud tires and not so great for my Minnesota packed snow/ice roads. Just not sure if they will fit...

Alternately, if the first gen Tundra spare would fit?

 

Finally got around to getting these together, 16X7 powder coated and mounted. I took a while to find a cap that would work well.
I'm pretty happy with the result. I will go with BFG all-terrains next tire change.

 

Had a little inspiration from the overseas yotas.