Goose gear seat delete question.

I’ve searched everywhere for an idea of what it looks like or how it works with no luck.

I have the sub and am thinking the 60 percent w/ sub not the full 100%. How does this look? Does it let me keep the one seat and just do a platform in front of the sub?

thanks

 

You could ask here. I’m sure there are other threads also

https://www.tacomaworld.com/threads...-gear-seat-delete.693081/page-6#post-26099271

 

I’ll take a look, I cannot find an answer anywhere. I did send a message to goose gear but no luck yet.

 

If you get an answer from them, please post it here. I have sent them a message but never heard back.

 

From goose gear:

There are two second row seats in your Tacoma Double Cab. A 60% seat on the passenger side and a 40% on the driver side.

You may install just the 40% side or just the 60% side or install both for a 100% delete.

The base plate for our 40% and 60% Rear Seat Deletes for the Tacoma Double Cab (without sub woofer) go all the way to the rear back wall of the vehicle. Installation requires permanently removing all of the Toyota factory plastic back wall and trim (including the cubbie, if equipped).

The 60% Sub version has a shorter base plate and retails the factory back wall with the sub woofer inside.

We also offer optional Infill Panels (sold individually or in pairs) to box in the exterior face by the doors underneath the Seat Delete Base(s)

Sounds like you can get the 60, with sub, and not permanently remove panels as well as successfully retain the one seat in the back.