1st Gen Lunchtable Thread - General Discussion

Should be fine. Just don’t top off

 

Ahhh ok. I wonder if it was different on 01 up

 

Ok cool, I should be able to actually fuel it right? Reading a description of what it does now and that's what I'm not 100% sure on.

EDIT: I see there is another valve that will allow air into the tank via the charcoal canister so Ill be good, at least I assume.

Its also called the overfill or rollover valve, so I'm sure your truck has it.

 

Mine looks like the Vans logo

Should see the many signatures by customers over the years; some write like they're god damn 5 years old, others swear they're doctors...

 

My names written different everytime I write it

 

It'll matter when you buy a house; shit better match.

That and don't go adding an initial in all your signatures only to omit it in one, cause then you'll have to sign all over again.

Same with private property in CA.

 

What do you know about 5sfes?

The one in my 96 is from 93 according to the vin tag on it and has big cams

I got a rebuilt head with cams for a "5sfe" that went on fine but a couple bolt locations and small things are different but the cams are weak compared to the old ones that came out

Would you be able to find out what it came off of if I gave you some casting marks or something along those lines?

I'm wondering if I can use the big old cams in the new head If I just transfered the lifters over to the new head... I just don't want to not be able to cruise at 90 like I was before since I would be running smaller cams now I was getting 31mpg on the bigger ones anyway

 

Haha

buy a house

What do you think I am? A millennial??

 

That my local junkyard is chock full of em

 

looks like it’s different, rockauto lists completely different filler neck parts . The newer one has an extra hose on it.


Something I’ll have to look into more for the next version of my flatbed filler

 

So glad I switched over to a quick squiggle, saved me hours buying two houses.

 

Lawn Crawler status unlocked

 

big old vs small new

 

Interesting

 

That's a very large cam profile difference for a shim over bucket engine

 

Yeah... On the test drive I was like, shit I'm doing 90 and it's still pulling

 

and that bitch ran with the stock ECU?

 

sounds like it was a pretty good first day. Were you excited?

 

Not only that, he did burn outs in the Papa Johns parking lot