1st Gen running 2019 4Runner 20” wheels

Looking at some limited wheels for my 04 6lug Coma. Thinking 33” tire and factory 19-20 4Runner limited wheels. Truck is factory height. Plan on leveling as it will remain a pavement princess. What’s y’all’s opinion? 04 PreRunner Ext Cab

 

33’s need a 2” lift or you’ll rub and might not even fit them

wheel size being too big isn’t going to be an issue

 

You asked for opinions, so........

That's a look more fitting for a lowered street truck.

Lifted trucks need more tire, less wheel.

 

To piggyback off that I would go with oem 16-17" wheels and 265/75/16 or 265/70/17's

 

Welcome to TacomaWorld
Good advice above.

 

Love feedback. My wife has a 20 limited and I was looking at her wheels like hmmmm….. but I agree, more meat less street. I just know my f150 FX4 looks hella good on 20’s and 35’s. But the Coma has a much narrower body so I see all points.

 

https://www.tacomaworld.com/threads/3rd-gen-wheels-on-a-first-gen.427855/
https://www.tacomaworld.com/threads/3rd-gen-rims-on-1st-gen.433417/
https://www.tacomaworld.com/threads/3rd-gen-sport-wheels-on-1st-gen.534404/
https://www.tacomaworld.com/threads...er-toyota-wheels-on-my-1st-gen-thread.563416/

I'm all for later model year wheels on 1st gens - here's pics and good info in the last link about fitment requirements.

 

I always keep photos of things, so here is a pic. you will need spacers if you are not using "skinny" tires

 

There is my “before” pic. Lights, panted grille, wheels & tires and leveling kit to come.

 

After wheels, tires, leveling kit, grille painted and some aftermarket lamps. Gotta get it cleaned up so better photos to come.