What Have You Done To Your 3rd Gen Today?

Why didn’t mount the plate behind the panel

 

I ran wires that are probably one size too small (I get a decent amount of voltage loss)from the battery along the frame to the bed, then wired that to a switch in the bed that turns on the cig outlet that the fridge is plugged into. currently is just zip tied to the shell, but i want to mount it somewhere. not sure where yet.

 

Used it to bring home a new golf cart today.

 

I got the amp, woofer, harness- $1300
And the speakers I purchased earlier. Kickers and the price slips my mind.

 

Unfortunately, the CH4x4 switch panel for the short switches isn't wide enough to mount to the factory screw holes behind the panel.

 

Threw some new bed decals on there today.

 

I feel like it is looking into my soul...

Great pic.

 

Set my man-card on fire and made these so that the kiddos aren't grabbing at air while trying to get in. Also because I'm too cheap to buy tube steps or sliders or pay some Jeep site for a pair.

Wish the taco came with hard plastic backs so their muddy shoes wouldn't leave mud prints everywhere. What I have on there now helps.

 

Installed DMM. Thanks to The Taco Garage.

[/QUOTE]

I wish I could find some plugs or low profile black machine screws for the unused holes!

 

I'm not sure how big those holes are, but you might try something like these push pins.

$11 GOOACC - GRC-33 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler

https://smile.amazon.com/GOOACC-Retainer-Plastic-Fasteners-Chrysler/dp/B07L6FJGR4/

 

These worked well for the unused holes on mine:

3/16" and 5mm Black Hole Plugs

$14 WidgetCo 3/16" and 5mm Black Hole Plugs, Conceal Most Holes in Plastic, Wood, Metal & Fiberglass (Qty 25)

$6 WidgetCo 3/16" and 5mm Black Hole Plugs
https://www.amazon.com/dp/B00TQ59380?_encoding=UTF8

 

Is your Tacoma 2WD or 4WD?

 

Installed bilstein 5100’s all around and spider trax 1.25” spacers today. Really happy with the mild lift and the stance now.

 

Really needed an air compressor for a small job yesterday and then I remembered seeing this on here, fits behind the rear seat on driver side, been meaning to get one so I pulled the trigger.

 

Should work just fine.

 

Where do I begin? Seriously?

 

Today I scored a sweet deal on 5 used Falken Wildpeak at3’s for $225. They had 9/32 tread left so I had to pull the trigger on them! They’re 265/75/16 and now my 2/1.5” lifted taco finally looks more proportionate. Glad to say I finally feel satisfied for a while but who knows what comes my way next for the taco build

 

There are. Most standard is taking our $$$.

 

So... I just did a load of laundry. In my jean pocket was my Tacoma key fob.... through the washer and the dryer. And it still works!! Hahaha