KC CYCLONE V2 color demo

Just wanted to get this going in the community asap since they just released and they are kick ass, I also wanted to share this for all those who are interested in the other various colored lenses they offer. I have tested them all, including the white diffused. enjoy
the first phot is showing that the entire engine bay was dark despite having little light coming from my garage corner.
@WrecklessAbandon @tonered buy a set for your under the hood lights these are bad ass!




on the left is the old v1 in standard clear lens, on the right is the v2 in standard clear lens


this is just a single v2 in clear lens pattern, very bright over the old v1.


this is the v2 with the diffused lens, it appears almost identical but there are some small minor differences you can see, you decide.







last few are the red, green,blue and amber. IF you are looking for under the hood lighting, rock lights dome lights, not just for tacoma but any make, these v2 kick ass and do the job well. They have the same draw as a baja designs rock light yet still being bright AF.

The next thing I will be testing is the v2s, vs v1s as rock lights, and baja designs rock lights mounted under the truck, vs v2s. stay tuned, shout out to @memario1214 for the gear and letting me test these



input and feedback are greatly appreciated no matter how degrading

 

Looks good

 

Looking good Mike. I love my amber v1s. Can only imagine how much brighter these v2s would be.

 

dude!!!!!!! I forgot you had those in there man, kick ass, are they on a switch?

 

Yup. Just a standard rocker.

 

Damn if I could only find some light mounts for under my hood I would put a pair of these in myself.

 

You just need some Neodymium stud magnets like these, they won’t go anywhere. I use something similar.

2 Packs CMS Magnetics Powerful Neodymium Cup Magnets w/Male Threaded Screw Stud #12-24 - 90 LBS Pulling Power Each - Heavy Duty Rare Earth Pot Magnet | Magnetic Round Base | Magnetic Assemblies

$20 CMS Magnetics - (2 Ct) Powerful Neodymium Cup Magnets w/Male Threaded Screw Stud #12-24, 90 LBS Pulling Power Each, Magnetic Round Base Heavy Duty, Rare Earth Pot Magnet

https://www.amazon.com/dp/B0181LX6SC

 

Thanks brother where do they screw into?

 

Saweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet ready and waiting

 

The magnetic mount allows you to stick them onto anything metal. The Cyclone sits on the stud and the nut holds it in place. I’d have to dig up the exact ones I have that came with a matching nut.

 

I’m using them for external rock lights. I can pick up a 20lb dumbbell with one of my magnets the size of a quarter, with capacity to easily spare. Neodymium Magnets are the strongest magnets commercially available, they are absurdly impressive. I’d have to check but I think my units are rated at something like 100lbs pulling force. Really the problem isn’t them staying put, it is getting the damn things off if you don’t put them in the right spot. I almost instantly regretted sticking that thing to my tool box for the photo, without the Cyclone threaded on, it would be almost impossible to remove.

 

I might try this now. good idea. and the mags are cheap AF

 

Here ar the units I purchased. Don’t recall if it was the 92lb or 100lb units.
Edit: I used the 92lb units.

MUTUACTOR 4Pack Super Powerful Round Cup Magnet with 1/4''-20 Male Threaded Stud, 92lb Vertical Pull-Force Non-Shattering Neodymium Magnet with Nut and Washer for Lighting, Camera and Other Brackets

$18 MUTUACTOR 4PCS Super Powerful Round Cup Magnet with 1/4''-20 Male Threaded Stud,Φ1.69 92lb Vertical Pull-Force Non-Shattering Neodymium Magnet with Nut and Washer for Lighting Camera and DIY Brackets

https://www.amazon.com/dp/B0837WY4MJ?_encoding=UTF8

 

Ordered those now just need the Cyclone's

 

paging DR.H @memario1214