Show your 285/75/16 and 285/70/17

The one inch does not require a steering spacer. This is the entire 1” Toytec kit.

 

Yea I went from 22.5mpg avg stock. 21 after the lift, and down to 17.5 with the ko2

 

Just bought 2016 and it came with 285/75/16s

 

Been wanting to do a 2" but with the pain of adding the spacer think I'll do a 1". Steering didn't get stiff after?

 

Bilstein 6112/5100
Icon RXT
Camburg UCA
285/75r16 GY Duratrac
SCS SR8 Bronze 16”

 

Rims are awesome. What grill is that? Want to copy

 

This is a new one and will install soon, but I’ve done 3 other Tacomas of mine over the years, the last one was a 2019, No steering difference whatsoever.

 

Was it straight bolt on, or did you have to modify anything during install? Thanks

 

just the standard OR grill but removed the chrome ring and plastiderped it Red. Same with the emblems. Going to matte black the mesh

 

Like it. Did the same red type theme on mine with stripes. Thanks

 

These are just temporary wheels and tires. My set hasn't come in yet.
285/70R17 Ridge Grapplers on Procomp 17x9 4.75" BS

 

285/70/17 Bf Goodrich Ko2

 

2” lift bilstein 5100 max.
285/70/17 Ko2 c load.
FN six shooters 17x8”
0 offset
Rubbed a hair on front mud flaps. Daily driving no rub. CMC in near future to avoid rubbing while off-road.

 

285/70R17 on Method 305s with Bilstein 6112/5160s on 6/5 clip and Icon RXT

edit: no rubbing under normal driving, no cmc needed. Rubs off-road if I’m going to fast and hit a ditch or something to stuff the wheels up in the wheel well

 

It’s a fairly straight bolt on, don’t recall modifying much, maybe radiator bracket. About 6-8 hours install time.

 

285/70r17 Falken Wildpeak AT3W - Black Rhino Chamber 17x8.5 0-Offset - Bilstein 5100 Front 4th clip ~1.55in(stock rear) - Cab Mount Chop

No Rubbing so far, seems like I will not rub with the cab mount chop at all. Decided to do the chop before just in case it would rub when I got the tires and am glad I did.
Stock alignment as well.

 

Icon rebounds wrapped in Nitto Ridge Grappler 285/70r17. Stock suspension (2020 TRD OR 4x4) zero rub. 6112/5160 and Icon AAL with SPC UCAs going on Monday.

 

Your saying the front end in that picture is stock suspension?

 

Yessir that’s exactly what I’m saying. Stock suspension is still on…with current wheels and tires. Getting my suspension installed Monday. The dudes at Discount Tire expected it to rub at full lock in reverse at a minimum. It doesn’t. I also did the curb drop full lock…still no rub.

 

Im positive it rubs offroad. Also might rub more after those spcs if not tuned correctly.