What Have You Done To Your 3rd Gen Today?

Mine was built in Baja and it has the loops….would hit up the dealership if I were you.

 

My 2020 Pro didn’t come with them and I had to add them.

 

I bought one ! 2019 TRD off-road.
It has the adaptive cruise control.
Can i change this ugly grill? And have it still work.

 

Had the same experience with the supplied bag. Using it for small tools like Allen and torx bit sets, etc; and just store the pump and bag in a large tote with recovery gear and other tools.

 

Your Hooke road panel had the holes lined up? Seems the heads sit within the counterbore of the panel. Mine did not line up and the screw heads stick out.

 

SCOOP POWA!!

 

And the most asked question on TW,,,,link please? love the top one.

 

The Grill is good. Just change the chrome surround to a black one.

 

I have that same auto knife!

 

Where would one find this black surround you speak of?

 

Yes

 

I am all about Otto,,,I mean Auto.

 

There's a Toyota part #, don't have it off hand sorry

 

My friend got the knife for me, works great and sharpens well.

 

Finally got around to securing my Cub Packs beneath the Retrax Pro XR. I’m thrilled with it lol.

 

Installed Lock’er Down console safe. Fit like a glove. Dropped right in no problem.

 

They were not perfectly centered, but were close enough that I was able to get them to sit properly. I loosely installed all the screws, but only used the supplied ones on those countersunk holes and reused the OEM ones for the rest. I then centered those countersunk ones the best I could and tightened them. After I was happy with those, I tightened the rest of them and was done. I also used some black paint to spray the supplied washers and screws so they would match the oem hardware i reused and would all blend in.

 

They are the perfect truck knives. Great if you need to cut a seatbelt or anything else for that mater but not a tragedy if stolen.

 

After wrapping my mirrors, I decided to cut a strip off the same vinyl and see if I could hide the chrome ring on the shifter. I over lapped it at 12 o’clock so the joint can not be seen. Not perfect, but looks way better than chrome ring. Only chrome left now are radio knobs and 4wd selector ring.

 

Installed the MESO DIY Stealth Shift knob kit. Only installed one switch on the drivers side and saved the 2nd one as a spare. It’s great to have the ECT switch on the shifter. I also wired it so that OEM ECT button still functions as normal.