Shop Time w/T.W. Friends

Pumpkin spice....I put it a notch below eggnog and that stuff makes my tastebuds go

 

Eggnog and dark spiced rum yum yum!

 

I second the

Love nog.

 

Same thing I replaced the thread inserts the other day only this one had helicoils in it and the customer doesn’t like them. Got them out, now to drill them, tap them, and install thread inserts, X 24.

 

Oh and we don’t have a forklift

Sitting on blocks it barely clears the guard for the limit switch.

 

The old forklift was a life changer for me, spoiled now, couldn't be without it.

 

People gearing up for pumpkin spice, then there's me:

 

I can’t remember anything anymore. Have no idea how I drilled and tapped the last ones unless they weren’t as deep as these. A 6” long drill but won’t work, not enough clearance on the sides to hold it and we don’t have a longer 13/16” drill. Plan B, or A. Haven’t figured A out yet

 

Bit extender? The step on the shank should allow for the space of the extender's collar.

 

"When in doubt, C4."

 

ANFO? Cheaper and requires answering less questions, especially when components purchased separately.

 

Thermite...but cant say it would be clean

 

I like where this thread is going!

Critter - Think you could source a dump truck from somewhere?

 

Then people think Beer tastes Good it is all what you like.

 

There are 2 ways to look at this We don`t have a Fork Lift so all our work can be easy to move by hand.

We have the fork lift so now we can handle bigger and heavier jobs.

 

Could be like our shop and have collet extensions....but only couple of collects that work in them