Custom vehicle harnesses made to order

Reminder -- note to self -- status update
Bed Light and DIR for @Dean62
H4 headlight harness for @Shadowhunter -- I'm getting pissed at myself for how long it's been, no excuses other than trying to catch up with other stuff
V5 switchback custom taps for @ktbell444 x 2 -- need to redo with 18 gauge b/c overkill is the best
Light bar harness for @DaddyRy19
LED T taps for @Ooh-it's all squishy!, @lylefk and @AbnMP13 -- waiting on mx150 male connectors
Headlight harnesses for FGT for @Empty_Lord and myself -- waiting on 24 position GEP

Also, some 2 pin deutsch connectors arrived and I know I need to build something for someone with them but I cannot find what it is/was.

If I owe you something and you're following this thread and you're not on my list, hit me up please, I've clearly forgotten.

 

You owe me a beer…
I’ll bet I’m not the only one - AMIRITE?

 

Don’t forget me

 

Just want to say that Dave’s headlight wire harness allows me to run 2020-2021 TRD PRO LED headlights. Plug and play. Works like a charm. And he was available immediately for some clutch trouble shooting encountered, (previous owner installed resistors for the signals). Very impressed. Will be ordering a set of reverse light harnesses to work with rigid flush mounts very soon.

 

Thank, adding you. I have a really bad tendency to forget if I don’t write it down.

 

Sent @ktbell444 's harnesses and @Dean62 's DIR, then moved @Dean62 's bed light harness to a custom harness and that should probably go to the back of the line. It'll be a bed light tap to engine bay relay to feed 10 cyclones as we want to minimize the power run but he wants to avoid going through the firewall to tap the cargo circuit.

TODO:

1. H4 Headlight Harness for @Shadowhunter -- Yes, the #1 slot
2. Rock light harness for @Dean62 for 10 cyclones

Pending Decisions:

1. Light bar harness for @DaddyRy19 who is going to decide if he wants a single barrel like @ljh824 or a double barrel like @Zumozuzu7

Pending Parts:

1. Male MX-150 to complete LED Headlight T taps for @Ooh-it's all squishy! , @AbnMP13, @lylefk and possibly @txranger83
2. GEP 24 position for @Empty_Lord and myself for FGT

Pending user input

1. Bumper harness for @Formidable (hit me via DM if/when it's time to get going, hopefully I can remember what we were thinking about
2. Someone who needed something with 2 position deutsch connectors, I cannot remember who this was, I need to spend time combing through my DM's

 

2020 has the bed circuit, use it as a signal.

 

Yes that is the plan. Just a long 2 conductor run for relay coil signal.

 

Tap the juice with fuse to Battery Charger Circuit on Tow.
Pseudo DIR type...

 

I think we go to the battery from the engine bay rather than the fuse box? I am not as good as Johnny at stuffing things into that fuse box.

 

Battery in this case just denotes always on.
If he doesn't use an electric brake module, then the jumper connector there, so there's always juice on that circuit at the Tow connector.
All plug & Play...except for the towing circuit tap.

 

You're talking the in cab one? He specifically doesn't want to go through the firewall for anything.

 

A jumper connector to T7 for HOT circuit at the Tow connector in the rear bumper.

 

Did we find that connector? I thought we had some trouble getting those? I remember at least one other guy wanted a tap off that stuff if possible?

 

Disconnect T12, De-pin terminal 5, remove terminal, crimp new terminal with seal and additional wire. Re-assemble.
https://www.bmotorsports.com/shop/product_info.php/products_id/3334
only the terminal is required.

 

Thank you @daveeasa this looks perfect!

 

I just had a thought. I have an order of @MESO V5 Ultimate turn signals on the way. Do you think I could run the DRL wire off of this too?

 

If I made a grille light tap for you, yes. But I have to go comb through my DM’s to remember what I made for who. I really wish I had a photographic memory.

oh, look, picture right there. Yes. Same as what I just sent @ktbell444

Well, a smidge different. 4 position instead of 3. Same basic idea.