Anyone Get These Messages When Attempting to use Crawl?

Update...2 weeks in the shop and I have a loaner.

They managed to do the brakes and just made me come down and remove 3 add a fuses that I had in place for heated seats and ditch lights before the tech would agree to troubleshoot (per the SM)

Won't get looked at til next week.

 

Update:

Issue was fixed via some fuses somewhere.

 

Those add a fuse really do mess things up

 

I used to use an add-a-fuse for my raptor lights and I had it tapped into my INJ fuse. Took me half a year to realize that it may actually be kind of dangerous

My now non-functional raptor lights are still mounted on the grille. The wire harness broke while I was removing it and I would have to replace the lights to fix it smh

 

I had a similar issue when i had my raptor lights fuse tapped in the INJ port . I brought my truck into the dealer for the 10k oil change and then on the way home it just died in the middle of the road. happened a few times the next day too. The engines power would cut off with no notice and you'd get all the those malfunction errors on the screen.
Had it towed back to the dealer, they looked at it for about 6 hours but couldnt find any issues so they pull the fuse tap and the issue stopped. I had that fuse tap in there for about 8k miles with no issues before the oil change so no idea what caused it

 

What would be the alternative for heated seats?

This time I went to sunroof (I don't have one), Ign 1, and tail?

 

I had my STOP fuse blow and gave me a ton of warnings similar to yours when I was off-roading. It even restricted me from turning on the truck normally with out doing the 2 press and 30 second hold on the push start, had to manually override the shifter to get it into drive too just to get home. When I was trouble shooting everything and found out it was just the STOP fuse that caused the truck to pretty much go into limp, I did notice that 75% of the fuses in the engine bay box wasn't fully seated from factory.

Replaced the STOP fuse and pressed every single fused down more and I haven't had an issue since.. Mines a 21 OR.