1st Gen Lunchtable Thread - General Discussion

Another project going on so have to wait for the saw before cutting pieces for my cube.

So in the meantime, more scrapping



Doing both "colder" and "hotter"

 

https://www.walmart.com/ip/Bullpiano-Dryer-Vent-Cleaner-Kit-Drill-Attachment-Nylon-Chimney-Brush-Rods-Electrical-Rotary-Drive-Sweeping-Cleaning-Tool-With-Long-Flexible/503840229

For loosening some of the dirt inside the frame?

if it comes with a brush small enough to stuff in one of the holes anyway

 

I eventually landed on just washing it out and leaving it at that. If it’s bad enough that you can’t wash it, you’ll need more than a brush to move it anyway.

 

Mine was filled with frame tortilla chips

 

I just wanna clean it decent before I shove a FF hose or something in there.

I’ll have to see how bad it is I guess

 

Mine too. Nicely salted ones at that

 

The 99 made itself a nice drain hole right in front of the spring hangers.
I’d prefer the 02 not get to that point

 

i used pressure washer inside frame holes, have u done that yet?

 

Looks like my steering rack continues to bleed out. Anything else I should change while I’ve got that apart?

 

Same yo, I've since drilled a couple more drains haha

 

Bung hole camera on a stick

 

Put antiseize on the lca cam bolts

 

Yea I did that at the car wash the other day for awhile. It seemed like it washed a bunch, and every hole I fingered seemed cleanish of both rust and dirt.

 

Fancy Black any different than normal red

Fluid Film 12 Oz Undercoating Protection Aerosol Spray Can Black 3 Pack, Rust Inhibitor and Prevention, Anti Corrosion Multi Purpose Penetrant and Lubricant, Spray Can Extension Wand and Tissue Pack

$47 Fluid Film 11.75 Oz Undercoating Protection Aerosol Spray Can Black 3 Pack, Rust Inhibitor and Prevention, Anti Corrosion Multi Purpose Penetrant and Lubricant, Extension Wand

https://www.amazon.com/dp/B08MQZDW1Y


Appears to be just be of color, nevermind

 

Would

 

I highly recommend a very heavy spraying of Coroseal inside frame before Fluid Film or Wool Wax.
A cheap undercoating gun with 360° wand extension gets it where it's needed most.

 

It's so hard to find a house in SF with a flat driveway that has enough space for a car. It instantly cuts your search to like 10% of houses.

 

Isn't it funny that the "wild west" states and cities have surpassed SF as being a respectable and civil place to live.

 

New rack bushings, unless you're getting a new rack then I think? they come with them.

 

If you don't need the extension wand, it's on sale at Advanced Auto this week (until the 29th).

https://shop.advanceautoparts.com/p...-lubricant-11.75-oz.-aerosol-00207/10546465-P