1st Gen Lunchtable Thread - General Discussion

That's just one brand though. Show me something from ES

 

I think es owns prothane

 

<knocking on wood as I type this> So far my new seal has been dry as a bone. I freeze the seals with grease on them to make installation easier.

I just happened to have a piece of black pipe about 18" long (e.g. cheater bar) that fits nicely over the existing handle.

 

Joey is a good dude. I buy a lot of cruiser stuff from them.

 

Another frame bites the dust. Still wants $3500.

https://kansascity.craigslist.org/pts/d/independence-1997-taoma-part/7373744345.html

 

Lol… I paid $1300 for the red 2002 and 4500 for the supercharged 95k mile 1998


That one right there is a rip
Off

 

Same company

 

$3,500 is to much. Id pay about $1,500 for it. I even have the frame well most of it to fix it.

 

Find me a nice DCLB frame and keep it at your house for a few years

 

I'm running just the 5100s all around on my 2nd gen. No complaints, they are stiffer than the stock shocks were but truck feels like it handles better.

 

I’m tempted to make an offer really. I can use the back window, the doors, maybe the whole front clip if I’m feeling saucy. Scrap the frame, sell the 4wd parts and drivetrain, maybe even break even.

 

here you go. It will work for a 2nd gen. And your close enough to get it.

 

You would make more than even. there is about $6k in parts there.

 

His truck rides terribly. I can’t do much about the blocks and rough country rear shocks. But I can hopefully fix how the front rides with his blown stock shocks. Also might help his alignment since the JBA uppers shouldn’t be on a stock front suspension.

 

Hey guys,

sorry if this is the wrong place but I’m a noob.

I’m looking for info on 1st gen wheel bearing replacements. I’ve checked around a little bit on here but most info I found is for 2nd / 3rd gen. Didn’t seem to be anything on the “mods / DIY” section unless I’ve overlooked it. I’m driving home so I won’t be able to delve deep into the threads until later …but thought someone here might point me in the proper direction. Thank you

1997 tacoma xtra cab (2.7L)

 

Defiantly will make it a better ride. I am still running stock uppers at the 2.5 setting on the 5100s with no issues. Why did he get JBAs for a stock front end?

 

I would buy it to put on a 4r frame

 

$20 says doods on Facebook told him to

 

I sent a gentle email telling him why his price is too high and asked if he’s willing to negotiate. Seemed like hitting him with less than half right out of the gate would be a shock.

 

Yeah I think that's the best approach. He may get mad then in a month email you back when he hasn't sold it yet.