Experience with 3rd Gen CBI High Clearance Front Receiver?

Anyone have experience with the 3rd Gen CBI High Clearance Front Receiver?

https://www.morris4x4center.com/cbi...yZ_62X7qx0nGkv6TwepnnNdUVK50xP3hoCZ_IQAvD_BwE

In particular, wondering about whether or not I could install a high clearance bumper at the same time.

 

You shouldnt need a reciever and a bumper, whats your end goal?

 

Good point. Today, I want the high clearance receiver so I can use it for winching/recovery (I don't want to permanently install the winch). In the future, I would potentially want that capability along with added front-end protection and changing my approach angle with a different bumper. I've found that my front end meets the ground quite a bit with the stock bumper cover.

 

Most aftermarket bumpers are winch compatible so that would kill two birds with one stone. That said I think the receiver mounts in the same location (frame mounting points) so you would obviously have to remove it and sell it or something when you swap to the bumper.

Otherwise I'm not familiar with the CBI but I know some folks have ran the mobtown. They work for what they are.