Your take on the ARB High Performance On-Board Compressor

Finally bought it and the slee mount as well. Will be working on this soon

 

Does the compressor completely stop at the desired PSI or does it begin to constantly stop and start indicating that you’re at your desired psi?

 

Start/stop at desired PSI. I have thought about buying a better regulator to see if it fully shuts off but it's good enough for now.

 

I'm pretty sure the compressor had a bleed valve somewhere and will pulse on/off indefinitely. Or I just didn't tighten my fittings snugly enough.

 

If I turn on the compressor without hooking up a tire it will run for a second or 2 then shut off

 

I mounted mine on a SLEE mount under the hood.

also bought the MORRFLATE to air up all tires at once.

https://morrflate.com/product-category/morrflate-multi-tire-air-kits/

 

I ended up with this setup:

 

Mine does that too, then after 30 seconds or so it'll run for 1 more second then shut off. Repeat till power is cut.

 

Shameless self-promotion: https://www.tacomaworld.com/threads/truck-bed-upgrade.698090/

 

I mounted my ARB twin in the drivers side bed on my 20 OR. For those who are saying you don't have a cubby, you can make one by cutting a hole and putting a cover on it (although quite a shame Mobtown is gone). I have the air port and power switch mounted on the outside for convenience as well. It works great but its already a pain in the ass to air up, can't imagine using a small compressor like some do. The times I've gone wheeling, half the group doesn't bother to air down so they end up waiting on you, which can seem like an eternity.

Only downside to the bedside mount is the amount of dust/dirt that gets in. I didn't put in the dust cover, and yes it gets absolutely filthy. I don't have the appetite to pull everything out again though. I just go in and blow it out with compressed air every now and again.

Here's a pic when everything was nice/new/clean

 

That is sweet, I have the same mount and have been wondering how to incorporate a DIY wifey manifold into it.

 

Any details on the dust cover option? Is that something we can buy somewhere? I have all my parts and just waiting on time to install.

 

I got this installed under my hood last week and am stoked! I bounced it around on Chimney Rock in Tucson Sunday and aired up WAY faster that my old trusty portable. I went with the MORE Mount under hood location, because this warlock fits perfectly in the engine dead space. Cheers!!

 

Dual ARB in the engine bay on a Slee mount. Remote air chucks to the driver & passenger side truck bed. Small Toyota switches to the overhead console for the compressor and lockers.

ARB Compressor Install -
https://youtu.be/dU5F1ccnFnc

Remote Air Chuck Install -
https://youtu.be/dB0muc0XWX8

Lines, Switches & solenoids install -
https://youtu.be/snhGjtQz0uQ

 

ClassyTacos, Nice work on your install Vids, I watched them all kinds before heading into my own install. Thank you!!

 

Thanks man, appreciate it.