What Have You Done To Your 3rd Gen Today?

Simple roof wrap to go under the roof rack.

 

Got mine in the other day. I thought I was done, then my wife asked if I wasn’t afraid it would be stolen. I looked around online and have some M10 security nuts coming that hopefully will alleviate those concerns.

$20 Lightronic M10 Premium 316 Stainless Steel Anti-Theft Locking Nuts Security Hardware Kit for LED Light Bar Work Lights (4 Lock+ 1 Key)

Lightronic M10 Premium 316 Stainless Steel Anti-Theft Locking Nuts Security Hardware Kit For LED Light Bar Work Lights (4 lock+ 1 key)

we will see.

 

Okay maybe this is a little too bright

this is without the high beams

 

Meso v5's installed and hooked to DRL's.

 

Put this on after some rust sanding and a few coats of self etching primer, primer, and rubberized undercoating. (The sliders are next for a rust removal session, won’t happen till after winter though)

Also put in the AJT chrome delete kit I picked up on the BST forum.

 

It’s all in the first post in my build thread. There should be a link to all my mods too

 

Two more easy additions, one which was simple, but holy crap what an improvement

Bosch Icons. I don’t think I realized how bad the stock inserts really were. The blades on these actually stand up on the glass, and no streaks

 

I might do the same. I think my windshield wipers make my windshield dirtier tbh. I rain-x the hell out of my windshield so I don't really use the wipers very often

 

The wires by the bend are hidden under the bend. The green circle is just a power cable that is tied in the opposite direction. It's been like that for over a year with no problems.

 

Some guy who posted about his brakes not working cut the wire he’s referring to. It cuts the wire for the electronic hydraulic booster thingamabob.


https://www.tacomaworld.com/threads/brake-failure.739612/page-7#post-26333135

 

Please share what method you used to run DRLs to your V5s

 

Dave's T-Tap:
https://www.tacomaworld.com/threads/led-headlight-t-tap.737915/

 

White letters out!

 

Good beer choice!

 

Got my 2LM switch and harness installed today. Worked like a dream. Highly recommend this for those who drive MT and tow…especially reversing uphill. Clutch saver!

 

Bolt on RCI

 

I done quite a bit since my last post.

C4 Front and HC Rear
Radflo suspension 2.5 front & rear with resi’s in the rear
OME HD Leaf Pack
JBA UCA’s
White Knuckle Off-Road sliders
33” KO2’s

 

Dang, That's bad ass.