BakFlip G2 or Undercover Tonneau Cover?

Perhaps you should have paid attention to the test results.

http://www.trucktestdigest.com/TTDfeatures/FeatureTailgateUporDown.htm


http://kwc.org/mythbusters/2005/11/episode_43_seasickness_cures_f.html

There are tons of other tests and articles all supporting the same thing. So now you can go back to being the smug know it all.

 

On the subject though, I have the Bakflip G2 and it doesn't leak in the rain. The only time water has leaked in is during a car wash with pressurized water that sprays along the seals. Even then the water that got in was minimal and the center of the bed was still dry.

 

BAk Flip is falling a part taking it off. Cracked warped and is just 2 yrs old.

 

can anyone tell me where to get a new skid plate,not the factory one.but a custom one.i have a 1999 prerunner with a 2 1/2 inch lift.even if it needs to be fabed.or any after market skid plate.it would be nice to get diamond plate to match my tool box and bed rail.just got superliner sprayedin the bed,turned out great! looks like a paint job.much better than any other brand.

 

Morrie here owner of www.bakfactoryoutlet.com. We offer factory direct prices and industry best customer service. check us out before you make a final decision. I will personally handle your order 866 506-0142 ext.704

 

I am happy with the trifecta, if not then the backflip is my choise

 

I was looking at those but went with the access limited. Fit is perfect, (you take the rails off and install with little spacers, provided).
Cover bolts rather than clamp on. http://www.agricover.com/downloads/pdf/40566_Toyota_Tacoma_Additional_Instructions.pdf

Seals tight and rolls out of way quck. When you roll up it does not block window.

I like mine.

 

I saw a video that showed a hard folding cover with patented self locking system that locks automatically as you push it down into the Tacoma rail system? I did not bookmark it and I dont't know who makes it?

Has anyone seen this type of folding cover?

 

I think you answsered your own question. it is BakFlip. they are the only ones i know of that slam locks with no key. Bakflip is made by Bak Industries.

 

Based on what I read, you have to take the rails out! Not a very Tacoma friendly option.

 

are you talking about having to take out the bed rails? I don't believe any bed cover requires you to do that...if you did, that would cause the bed to flop as the rails add stability. what the bakflip does is has its own rails that mount onto the bed rails.

 

BakFlip website only has Double cabs listed for '06 Toyota tacomas. Does anyone know if it matters if i have a regular cab but still the same bed length? http://www.bakflip-tonneau.com/cart/prod_listbsHD2.asp

 

Hello Splitshot:
I am th owner of www.bakfactoryoutlet.com and have an answer to your question. The 2006 Double cabs are 5' a bed length, the other cabs have a 6' bed length. Please measure your bed from the inside edge of the tail gate to the inside edge of the cross rail at the bulk head of your bed. We have a great forum price on the BakFlip for your Tacoma. Please call at 866 506-0142 ext. 704 and I will be happy to take care of you.

 

i have a bak flip and i would not recommend it to anyone it is a hunk of yiou know what leaks warped and is cracking and it is only 3 years old.

 

There have been many upgrades to the BakFlip in the last 3 years. All panels on the G-2 and HD are aluminum which does not warp or crack. The BakFlip HD is an OEM product for Ford now and there are a ton of Tacoma World forum members who love their BakFlips. No hard folding tonneau does what the BakFlip does by allowing maximum use of your truckbed without removing the cover. The BakFlip is the most practical and versatile cover available today. Please contact me for the best price and unequaled customer service.

Thanks,
Morrie
866 506-0142 ext.704

 

Yes you can. I have this setup.

 

if you ever get your bedliner done.go with superliner,it looks more like paint and will hold up to anything you can put in it.plus does not interfear with after market bed mats or extender.

 

My first one fell apart the second one they sent fell apart warped at the top then came apart folding area-leaks and has been readjusted a billion times-I would shop around before I ever purchased one of these cover.

 

I hA

 

They leak and fall apart have had 2 one they replaced because of glue issue and the 2nd one is no better. they claim now that its improvedwould go with something else.