2021 taco trd switch pro setup?

Send pics when you get em!

 

Late to the party here but I wanted to plug @MESO for a great product. Similar layout posted earlier with the switch bezel added:

 

Before I could get that one from Meso, I got this one: https://caliraisedoffroad.com/produ...-power-panel-with-concealed-mounting-hardware

Here's some options and I made the one I listed here work for your 2020/2021:
NOTE: If you have the 360 camera, you'll need to delete/relocate two switches. If you dont have the 360 camera, you only need to delete/relocate 1 switch.

1) WITHOUT 360 Camera, I got rid of the auto high beams. In my opinion, it's trash and rarely works properly. I end up blinding people for a couple seconds on a dark road before it detects their light and turns itself off, then takes a second to turn back on. Sure it works, but I'd rather use my high beams manually. So, I kept the auto high beam button plugged in, but placed it in the back. I had to file/dremel out a notch in the spot where the auto high beam switch was supposed to go, so I fit the traction control button there.

2) WITH 360 Camera, Do the same as Step 1 with the auto high beam. For the View switch, I was going to relocate it to the ECT switch in the center. I have a Meso shift knob with ECT there. so my ECT button is basically a blank spot. Makes more sense to me to have the View switch there instead of on the left.

You can play around with any combination of buttons you prefer. I have a swing out tailgate hitch and leave my parking sensors beeping off, because it will always think somethings behind me and beep like crazy. That's another spot I can relocate a functional switch to. The BSM sensor is always on for me. I can always leave that plugged in behind the panel and use that real estate as well. There's many options.

If you want to utilize all of your OEM switches, then get the panel that @OlympicTaco posted from @MESO or Caliraised. Meso is always out of stock though, and I hate dealing with Caliraised when things go wrong which happened 2/2 times with me. But they're the same as Meso stated he makes them for Caliraised.

 

CaliRaised Off Road has them, made by MESO. Here is a photo before the switch pro was installed 2021 Tacoma

 

Did you have to cut anything to fit the panel into the hole? My far right top button bumps into the plastic frame thing behind and the only thing I can think of is cutting the plastic which I'd rather not.

 

Yea you have to cut a small plastic piece on the top right side. Quick and easy.

 

Yes, I had to cut the plastic behind on both sides. A razor and dremel will do the trick..

 

Thanks guys! Guess I just have to cut it then