What Have You Done To Your 3rd Gen Today?

WOW I like that wheel. You got a link to that.
Thanks

 

They are discontinued. But ICB might still have a set left. If you need spare wheels in this offset and color I have two left for sale.

https://www.icbmotorsport.com/ravoratewh1627.html

 

Nothing wrong with that

 

Got new shoes today.... Falken WildPeaks mounted on Method 702's. Love the new look!! I'm getting a slight rub on my mudguards though so I'll either have to pull them off or cut them in some way. Any ideas??

 

installed my snorkel

 

I added a wedge to keep my field book and files from flying. Since stopping short in LA is pretty common, they have a tendency to wind up in the foot well.



It's just a piece of foam I got off Amazon, and if I have someone riding shotgun I can toss it in the back.

The upholstery is pretty slick, so has someone found a good solution to keeping stuff in place? Do you folks with front seat jackers find they tilt the seat back enough to retain things like Posse boxes?

 

You can use plasti dip or overlays: https://www.amazon.com/s?k=tacoma+e...oma+emblem,aps,195&ref=nb_sb_ss_ts-doa-p_5_13

 

I slowly heated mine with heat gun to bend them back just a bit. I used cold water on a rag while I held it back to cool it. Took a couple of tries but since you don't need much you'll never notice.

 

Solid! I'll give it a try

 

Just don't over heat them. Lol

 

Thanks for the reply.

 

Fixed a booboo

 

Got my Greenlane skid plate and DD SS3 Pro's and ARB (mostly) and Meso switchbacks installed, nice to spend a little time with the truck.



Found a passenger side mount by GTFO and sold by Rogue Offroad for the arb. Need to do a little more cleanup under the hood and waiting on a couple of fuse taps to arrive.

 

Nice!

 

Finished installing my ARB twin compressor on a slee bracket. I connected it to my switch pros 9100. Also added some redline turning gas hood struts

 

Installed my RSI cap

 

Duluth Trading has these neat front seat organizer things. Linking a couple options below. Not quite as easy removal as a box type thing or your foam chunk, but looks pretty handy. I've been considering one for a bit.

https://www.duluthtrading.com/cab-commander-78072.html?dwvar_78072_color=BLK&cgid=duluth-gear-truck-organization#start=2&cgid=duluth-gear-truck-organization

https://www.duluthtrading.com/mobil...color=DEV&cgid=duluth-gear-truck-organization

 

Why?

 

Ride great, look great, more noisy than my previous ko2 but that’s to be expected.

 

The Tacoma caps are tough to do with the compound curves. And the cap also frames the mirror so you'd be wrapping the inside edge too. A pro would probably wrap it in 3 pieces. One for the inside, and one for each half of the cap, Meeting along the seam where it's fused together.