What Have You Done To Your 3rd Gen Today?

I like how this dude rolls…

 

I’ve been using that same net for groceries and such for over a year without issue. I’m very happy with mine.

 

Built a hitch step/rear skid plate with remanence of an old ball mount and some steel plate I had kicking around. Also did a Xpel clear bra. No pic cause nothing to see…..it’s clear

 

Yep, and a lot of cars have jumpstart specific terminals no where near the battery.

 

That thing is huge. I've got a NOCO GB40 in my truck and my wife's car. She's used hers a few times thanks to the AZ heat. I had to use my for the first time about a month ago. They come in handy. $108 on Amazon and about half the size of that if not smaller.

$100 NOCO Boost GB40: 1000A UltraSafe Jump Starter – 12V Lithium Battery Booster Pack, Portable Jump Box, Power Bank & Jumper Cables - for 6.0L Gas and 3.0L Diesel Engines

https://www.amazon.com/gp/product/B015TKUPIC?ie=UTF8

 

I should have asked you to take the vanity visors out so I can buy them from you. Lol

 

STOP! Collaborate and listen…

 

Dang, that's bad ass.

 

Word to ya mother! Those should help you stop on the ice ice baby.

 

What size rotor did you go with?

 

Is this the kit that fits 16in wheels

 

Yes. It’s straight forward. Other than that,You pretty much just cut off the dust shield. Unless you remove the hub and install a shim, cutting is the fastest install.

 

The one that fits 16 inch wheels. Not too much bigger in diameter from stock. But, it’s thicker and you get 6 pistons.

 

Do you have a part number for it or link

 

Looks like 8’wide

 

https://sosperformance.com/products...-brake-kit-fits-17-plus-wheels-2005-21-tacoma
TR-323 and TR-325 fit 16” wheels

 

I do the same, then I have to account for the 25%+ of operator error that likely led to a bad review- ppl are stupid

it took awhile to pull the trigger on the noco but Amazon had it at a lower than normal price (like 80 something) so got it in time for a long road trip. Haven’t used it on the taco yet but have used to start up the lady’s van- no issues and immediately jumped. I try to put it on the charger every few plus months and I still haven’t removed the jumper cables yet but I guess I’m having a harder time than expected of letting go

 

Got these relentless mounts to get rid of the bungee holddown. Need to drill 2 holes in the lower lip that will screw into the wood and then the case will be drilled into the wood

 

Made some marks and plans for hoist and pulley location/run (has changed location from previous mentions). New location will allow me to operate remote and guide cap away from rear window of cab and also mounted on an exterior wall rather than the pedestrian door to the house.

This is as far backed up as I can go into the garage (see how much I’m sticking out the front). It’s just enough to raise the cap straight up clearing the garage (I do have a high lift which shortened the horizontal tracks overall length).

light will have to be removed/relocated (already moved it once prior to thinking of a hoist- why you see blue tape covering holes till I patched)

it took a lot of work and planning to get the garage setup to even get this amount of space.

I have about 5% left of crap behind me to find a home or toss and a few unfinished projects taking up valuable side space.

Spent a good Chunk of the day going back and forth between stores trying to find everything. Still need some more lags, eye bolts, a 2x10 and unistrut.

 

Wtf is that hood? You have a build thread?