The Official Unofficial Super Pacific X1 Camper Thread

It’s similar to the vlcnr pouch but it mounts using the t-slots. It’s almost as wide as the ceiling. Just a few inches short of being the full width. It’s a pretty good size. Can’t wait for it to come out. Now I wish I took some pix. It was their prototype.

 

looks like there's a photo one one of the last bag IG posts. cool idea, but haven't found a need for anything that big in the ceiling ha but it'll work for someone!

 

Yeah it’s a pretty big. It has a few pockets and probably not for everyone. I definitely like the iPad holder but not sure if they’d sell it separately. Just looked at their IG post and that is what the bag looks like. Doesn’t have the iPad holder on it though just the bag. If I remember correctly there were either two or three rows of pockets with a total of 4-6 pockets if I remember right.

https://www.instagram.com/p/CUOKnnAPr3A/

 

Interesting and I just ordered the other one too. I was wondering why we weren’t using the t slots

 

Ah yah that is big but who knows. Would be nice to not have stuff in the way.

 

Yah mine are in stock rails but the format has a starboard spacer of sorts. The lip that’s there to keep it in place isn’t long enough so it only covers the starboard. Like I when my mount loosened that VHB stood no chance naturally

 

You will need the starboard in order to raise the camper high enough to clear the side/front locating tabs inside the camper and allow enough room for the mounting hardware to work otherwise we would need a new mount or would have to drill holes in the tab to have it bolt directly into bed side c-channel rails. we thought about doing this, but it wasn't ideal drilling holes into freshly powder-coated X1 and would not give any downward force. Basically i have starboard all around from tail light to tail light they CNC machine 3 pieces then mounted the starboard on the camper then the bulb seal too the starboard so its all attached too the camper.

For my tailgate i also have a aftermarket aluminum relentless cap thats flush with my custom aftermarket rails. Spenser played around with different window trim pieces till we found somthing that worked ended up using 2 different kinds one for a 3gen and one for a 2gen a little fine tuning at the end playing with different kinds of weather striping on those window trim pieces to get the right fit.

Let me know if you need pictures.

 

Just picked mine up today. It is awesome!!! Well worth the wait. The crew at Super Pacific was top notch. Build #117.

 

Does it have the new perforated bed end pieces? More pics are always appreciated.

 

It does have the molle bed plates.

 

Niceeeee!

 

ooooh new multipurpose panels.. I like those.

 

I didn’t plan on using the old panels. These new ones will be sweet to mount on the sides for gear.

 

Dang it. Those new panels are cool. Wish I had 'em.

 

Did they change up the sleeping platform also?

 

Sleeping platform is the same. That just replaces the previous removable plastic floors. A couple benefits I see is that if you run a heater down in the camper the heat can pass through the holes. Another convenience is that it can slide side to side if you want access to the tent or camper area without removing a panel like you had to with the original plastic ones.

 

The heat transfer is a great point. I have a hose running from my diesel heater up into the sleeping area, but it's a bit of a pain to have to navigate around.

 

Does anyone know the pricing for these panels ?

 

Good point.
Did you buy replacement panels? Any idea if they are selling the new panels?

 

I'm assuming they're going to get rotated into the standard features?