Recommendations for plugging holes in bed?

What's up people?

Any recommendations on how to effectively plug the holes in my bed? See pic.



Or are these drain holes and I should leave them?

 

leave them there

 

Don't listen to that guy. These will fit perfectly...

 

It looks like someone might have installed an aftermarket tie down or something in that location.

 

It's a drain hole from the factory

 

Don’t plug them.

 

Unless you have a good sealed shell or hard tonneau cover, I’d leave them.

 

You made my day…

 

I can't remember if it was 3/8in or 3/16in, but plastic plug buttons fit perfectly:
https://www.lowes.com/pd/Hillman-2-Pack-0-375-in-Black-Plastic-Hole-Plug/3013226

 

They are indeed drain holes. My '21 TRD OR has only one located in the center of the bed floor close to the front wall.
As @Sterling_vH111 noted, unless your cap or cover is VERY watertight, or if you live in an area that doesn't get any precipitation, don't plug them.

 

i don't think mine has a hole

 

Maybe turning truck into a party bus with a pool?

 

If those holes really bother you, just throw in a bed mat and you'll never see them... Shoulda been done did dat.

 

ooooo thats gonna rust

 

I had never noticed these holes in my bed, so I got curious. After clearing away a hi-lift jack, traction boards, lifting the bed mat up, then digging in the dirt, I found one. Mine was naturally plugged, so I cleared it out with a screwdriver. I hope my truck is ok.

 

Put a OEM bed mat in, you will never see the holes and yet they will still drain.

 

Yours must be virgin

 

I'm sure someone is working on a CNC machined brushed aluminum, TRD emblazoned insert, that will sell for $169 and plug that holes perfectly! In fact, I'll do it!!! Pre-orders below:

 

If you don't believe that there is one on the other side of the bed just like it.