What Have You Done To Your 3rd Gen Today?

Which campus? I’m a Prescott alum

 

Yep, I did receive it but it's been some time ago. Don't even remember when but it was not long after I got the email. Works as expected. Haven't had the need to look at it since.

Had to go see if it's still there. Yup, it is.
Glare caused by the bright Gawgia sun.

 

I did the same thing but used a different harness

 

Sumo Springs

 

switched out the light bar and cutout fairing for a full metal fairing

 

Everytime I come around bling bling (ok kidding, local dealer had a SB mat on the shelf, so grabbed it)

 

How did you not get an airbag deployment with that? Glad you guys are okay too.

 

Icon Suspension and wheels!
Love em!

 

Loaded her up for the weekend!!
Skoden!!

 

Took a better pic of the custom stock exhaust

 

Finally my suspension arrived Going to be a busy day tomorrow….I’m glad I didn’t wait a year for them

 

That's a clean bottom.

 

What tint % is that?

 

That’s clean!
Why did you opt to put it there vs inside the taillight ?

 

Those are clean! I debate on which to pieces to get from aj and which from meso even their fobs. Meso seems more like oem replacement and ajt has a rugged look. His vent covers are held on my 3m though where meso is clipped.

 

15% in the front and 50% in the rear

 

Is it better to not go with bright plate lights? I bought a package of interior leds from Amazon and they had some included. Didn’t want to pay the $$$ for the diode interior kit. 20 vs 65$.

 

Got my lift mostly finished up. All thats left now is to reinstall the sway bar and the skid plate. No pictures because I already posted a picture of the side that was finished the other day.

Need to order wheels and tires soon though, the truck looks a bit funny with the small stock tires.

 

Installed a magsafe charger mount



How I did it:
- I started with a BerryItDesign phone mount (sadly no longer available on Etsy), and removed the face containing the magnets. I now had a flat surface to secure the charger to
- Next I used a Dremel to carve out a channel in the mount for the charge wire. I wanted it as hidden as possible.
- I made a very tiny (2mm?) notch out of the top of my dash trim (behind the mount), just enough for the wire to not get squished.
- I used Gorilla mounting tape to tape the MagSafe charger to the mount
- I then tore the dash apart and ran the wire to right above the cigarette lighter, where I made a hole above it where the USB connection comes out
- Put it all together and plug it in to the USB cigarette lighter and voila! a charging MagSafe mount in my Taco, with zero clutter.

Note: Havent received new phone yet, so my camera quality still sucks. lol

 

Git 'Er done.