What Have You Done To Your 3rd Gen Today?

Sadly, one load of loam, and the tailgate gap filler pulled off the bed and filled the gap with loam.

 

Lift is finally on, kit's been sitting in garage for 4 months waiting for temps to drop below 95 by 10am...

KDMax tuned last Thurs.

Triming to do, then tires next.(also sitting in garage, lol)

 

CMC so I won't rub in the whole foods parking lot anymore unfortunately my buddy who was going to weld the plates on for me broke his collarbone Friday

 

I have an OSB platform in it and just got a 53x74 memory foam mattress topper to put on the platform should be nice. not a whole lot of space, just enough to lay down and move around but I've slept in it already, without the pad, and it works

 

Bed rack gone. Waiting on diamond back to show up. Need to find a good spot under the bed for the 0.5 gallon air tank. Fend-x liners. And Gen 2 Morimotos.

 

Decked box and Leitner Hi-lift mount added today. Jack needs to be oriented in the opposite direction to access the tiny tub though

 

If I were doing it, I would purchase a panel of 2 inch "blue board" to put under me. (i inch breaks too easily)

And get a pair of "camp slipper socks" $20 or so, just in case ;-)

eta

OH! I just read about your foam pad/set up. nix the blue board! ;-)

But check the on-line info about the state camping sites. some might be closed or have the water shut off. Fore warned is fore armed!

 

Curious as to what they charge and your experience with them. They are like 10 minute from me and I've been on the fence about just booking an appointment with them.

 

Perfect knife for camping

 

This was a complete DIY! I bought a gallon jug of the NH coating stuff at the auto parts store. Sprayed it on with a home spun siphon wand that I whipped up twenty years ago.
Blew the mist into as many cracks and crannies as I could find. plus all the brackets and surface metal. It's at least "better". Better than what is yet to be known.

I can't say a thing about the application stations. or costs sorry.

 

Made a shock tower brace for the rear. Still going to add more bracing and mounting points, but its already night and day better handling wise now.

 

it's at a state park and we made a reservation. Water might not be on, but at least we'll have a spot!

 

We were able to pick our spot when making reservations at the Buffalo River State park in Glyndon Mn. Just lucky, I think we got the best spot in the place! River view, "corner lot", woods on the other two sides.

Nice place really.

 

Thanks for the clarification!

 

proper. sturdy. cool to the touch in the morning. it wants to be held.

 

mine has never fallen out.

i’m still using the OEM chrome shifter ring.

 

Firs time working on a truck and lifting it. Im use to lowering cars, like my 15 wrx.

Took way longer then I wanted, but i got it done by myself.

Bilstein 6112/5160 6/5 Circlips
Torch Offroad Sway bar relocate kit
HS AAL with 1/2 shim for the complete 2 inch
SCS Ray10s Matte Gunmetal 17x8.5 -10 265/70/17 Falken Wildpeaks

 

Looks great!, what kind of paint did you use in the engine compartment ?, thanks.

 

How many miles do you have on your `19?

 

https://jalopnik.com/toyota-is-recreating-the-1970s-magic-of-its-chinook-cam-1847868087