What Have You Done To Your 3rd Gen Today?

I did the same.

 

really? Mine are very bright and my map lights definitely don’t flash. Make sure your dome light is in all the way.

 

Installed blacked out turn signals

 

I sold the fiberglass cap and I feel a bit naked (close to 3 yrs since I’ve seen the bed rails). Washed it before seller arrived and helped the guy install and wired him up. Had to remove the stuff in the bed (bags/cases) until I get the smartcap installed. Unfortunately had some roof panel damage in transit and it’s waiting to be picked up so the replacement can be processed and sent out. Went from 2 caps to none just like that. Called my SA to schedule the 3rd brake service campaign next Saturday while I’m topless.

next day I took my da and some compound to the rear window to tackle the horrendous water spots. Will put on some c4 to the trim and the turtle wax/hybrid ceramic spray on the glass tomorrow. I pulled the header rail and front header to visualize the tonneau plugs (have had for over 2 yrs but wasn’t going to remove the cap for just this). When I put on the fiberglass cap it came with square foam pads for the header but likely have to remove for the plugs. Marked out the cut line and heard some unpleasant noises on side bed rail cap removal. 1st night to drop 10-20 degrees so I stopped and will wait till tomorrow when it heats up hopefully. I’m not a hardcore leak inspector, I didn’t care before and won’t here either but since I had the plugs and it fills that spot nicely that’s about all I’ll do (no goop, no silicone, no butyl/putty for me).

 

What's that? 4 mpg?

 

The WEATHER here will do worse than that overnight!

 

A minor lift was the last of a list of things I wanted to do. Not sure what's next other than driving everywhere and enjoying myself

2 inch lift

 

$3.15 is the average here in the FL panhandle but I manage to get just under $3 at SAMs or on base when I go to work

 

Nice!

 

Install step nerf bars or sliders.

 

Yeah it was a no-brainer for me to pay an extra $60 for the upgraded barrel and sights than to pay $400+ down the road to add on. I was more interested in the sights and ported slide for simply the looks. It doesn't make sense for a ported barrel on a gun that size. The HiViz sights alone is $100 bucks so it only made sense to go with the Performance Center model.

 

61k

 

Looks awesome! I'm visiting over from the tundra forum. How difficult was this center cap swap? I've been looking to do something similar

 

It’s really odd and only does it one time usually per startup.

 

I installed a QI charger that works with cases on your iPhone. I have a 13 Max Pro with an otterbox Symmetry case on it. This QI charger works every time....

Bomely Wireless Charger Tray Compatible with 2015-2021 Toyota Tacoma 15W Fast Center Console Wireless Phone Charging Pad Tacoma Accessories

https://www.amazon.com/dp/B09F38ZR6L?ref=ppx_yo2_dt_b_product_details

Install time start to finish is about 15 min. you will need a 10mm socket and a Phillips head screw driver. It connects to the lighter harness that goes into the center console cubby.

 

Expanded my platform so it's the width of the bed for all but a foot or so. And pulled out the memory foam pad so it Dan start to decompress from being wrapped in the cellophane it came in.

 

Custom Center Caps and Lamin-x on the Fog Lights

 

Got the skid plate that defeated me yesterday installed. Finished up with fluid film job and did the AC drain mod
.

 

Talk to me about these center caps.

 

Got em from Etsy. Cheeep. Super Stoked. He does em any way you want and comes pretty quick from Portugal