What Have You Done To Your 3rd Gen Today?

That only matters if your tires are directional. There are some A/T tires that are but not all. My Falken Wildpeaks are not directional so can be rotated in the cross pattern. The Procomps I had on my F250 were directional so I had to go front to back on those. I don't think KO2s are directional either. Unless you see something on the sidewall that says rotation direction you are fine to rotate them in the cross pattern.

 

Thanks for the reply. It may not be as critical on an auto vs a manual. Mine is a manual so I may just do the front only. I almost pull the trigger on the 340 or 355 kit but ended up getting another set of Volk wheels. I will definitely upgrade my brake when it’s time to change brake pads.

 

Can those maxtrax take a lot of sun?, probably they have some UV inhibitors...but sooner or later they will become britle...no?

 

I’m assuming so, they’re solid and people have been mounting them for years on the outside.

 

I'm thinking that they pricey investment...that's all

 

But then how are people going to know you off-road?

 

that's the important part...sorry

 

My buddy got Chinese knockoffs. I think I do remember you saying about you not buying China crap though.

 

You can break the manual so long as you're rotating appropriate to the type of tire you have. Directional tires must be rotated between front and back only. Non-directional can be rotated between front and back and crossed between passenger and driver sides.

 

They are Fuel Assault wheels with Nitto Terra Grappler tires.
http://www.fueloffroad.com/wheel/6761/fuel-1-piece-wheels-assault-d576/?finishID=329&lugs=5

 

You may want to look at the Body Armor HiLine Series front bumper. It's similar to the slimline hybrid but a little less expensive.

 

Here’s mine

 

Nice!

 

Awe man. The slope has gotten more slippery. lol

Now im gonna want those and the panel for the center console. question is, do i go for the Cali Raised center console, or the Rago Fab that has the bridge on it too???

Decisions decisions....

 

This was the least “noticeable” for my wife! There’s no way she would have stood for the Rago bridge model.

 

Even if i was married. If i decided on it, I'd get it and stand there like haha.

You did a clean job on the install. Now that I think of it: If i get these, then im gonna have to get some sound dampening material too, since i'll already heave the door skin off, ya know? My labor cost is high, and I don't want to have to charge myself twice to take off the same piece.

 

The Caliraised Molle Panels are fantastic. They fit perfectly and can hold quite a bit. Highly recommend.

 

You might want to order these so if you lose one you don’t have to charge yourself again to put one back in:

$8 Rexka 30pcs Door Garnish Moulding Retainer Clip Compatible with Toyota Lexus 67771-58010 Tundra Tacoma Sequoia RAV4 Land Cruiser Highlander C-HR Yaris Scion xD

https://www.amazon.com/dp/B07CJLB1BP?_encoding=UTF8

 

I myself bought some knockoff,a set of two came in a bag. I know Maxtrax are the ones to buy...but a set of two for $70 CAD ...even if they bail you out once...they paid for themselves, I think...but if left in the sun probably they will melt!