What Have You Done To Your 2nd Gen Tacoma Today?

New BA Winch Bumper with a Warn VR Evo 10000lb and sidewinder and new headlights

 

Added some grip tape to the top of my sliders in the 'step' areas. While it was amusing watching friends and family members (and occasionally me) almost eat sh*t from time to time during or after a rain, I finally decided to remedy the situation.

 

exactly why I changed from the 5100's to the ICON mid-travel

 

If I ever need to do this again I will just take the fender off. Holy crap was this a headache.

 

Rolled the truck out of the garage for the first time in 5 months and washed it. Over the last 5 months I did dual transfer cases, Chevy 63 swap and 3 link. It’s off to the shop next Tuesday for a custom bumper, setting up the hydro assist, new brake lines from the master cylinder, sliders, rear shock towers and crossmember mod to clear the front driveshaft. It’s going to be real nice to have someone else do some work on it. I’m ready for a break.

 

Those looks nice! Thanks I'll check em out

 

Those look like a winner, decently priced and look OEM. How well does the left side of the drive side seat hold up? Over the years I've found that to be the weakest point.

 

Just ordered my wheels. Black Rhino Rapid 17x8.5 0mm

 

I like those. Very sharp!!

 

Dropped it off at the dealer for frame inspection and goop treatment and they gave me this to drive around for 3 days.

 

What are your thoughts?

 

Added 7 gallon Roadshower, Kickass shower awning/enclosure and the Baja Designs Jerry can rack to the Prinsu that already has the ARB 8.5 foot awning and Sand trax. What else is there to do when there’s no power and it’s shite Nor’Easter weather?

 

The black ones in my 2016 looked like new after 5+ years of use. There was no wear on the bolster where you slide in and out. The bolster area is pvc if you buy leather or pvc covers. Only the center perforated section is either leather or pvc. That is why I went with full pvc for the 2nd gens. Personally I use the nerfs getting and out of my trucks. I do think this helps prevent excessive wear on the bolster. The 2008 had excellent seats. The only wear was early stages of fraying material on the driver bolster. That is why I covered those. They come with a 1 year warranty. You can buy an extended warranty. One of the best selling features, to me, is that if a section gets damaged, or cut, you can actually buy a replacement section. No other cover company offers that. If you jump in and have a "oh shit" moment with a screwdriver in your pocket, you can buy the section you damage. The bonus is the quality factory look of the covers.

 

Meh. It's a nice vehicle for sure. Better road manners than my '14 perhaps, but it's brand new with 2000mi vs. 7 yrs old with ~90k on original suspension. Won't be taking it offroad, though. Thought about it, but don't have time befor I take it back on Friday. Reminds me of a cross between my truck and my wifes RAV4. I can see why some people don't like the transmission. It definitely seems as if it doesn't know what gear to be in and some of the shifts seemed unusually harsh to me. And the drivers seat is way too hard.

 

Fiiiiinaaaaalllyyy did sliders. I highly suggest 4x innovation for 2nd gen reg cabs.

 

I noticed that also regarding the seats being like concrete!! Plus the dash to me looks like the inside of a Jeep with all the large round vents and just plastic overload.

 

Right on, thanks for the info.

 

I was admiring these the other day at the dealer. Not sure if you’ve seen em.

 

This is the most Hawaiian thing I've ever scene...

https://youtu.be/sISj__m2HtM

 

What is that on top of the jack?