What Have You Done To Your 3rd Gen Today?

I used an ozone machine. I think that’s the same thing? It worked ok but I think the smell is in the insulation under the carpet. I steam cleaned the seats and used a steamer to blast away all the crud on all the plastic parts

 

Falken Wildpeak A/T’s on Fuel D752 wheels. Coming soon, new grille and sidesteps.

 

Diamond back on and rok block installed.

 

3rd gen pumpkin

 

Whats this?

 

That’s what I thought I saw too.

 

So just noticed he's got an OR so prob the pro grill he bought had the camera mount.

 

Backflip mx4 installed. I can def see how there could be leaking on the sides as it doesn’t seal perfectly because the bed rail liners, but doesn’t bother me. Took about an hour and a half

 

went to the local wash it yourself place, because I needed the power washer from the caked on mud this morning. Also, a 50degree heated space is way more comfortable than washing outside in 35 degrees.

 

That sucks man, but the second time around it always easier! Have you pressure washed the carpet? It would be a good spring time project. I rolled around for a week with just my front seat bolted back in until I got it all done. Wouldn’t be difficult to bolt all 4 seats back in while you took your time on the carpet. It’s a little loud but only for a bit

 

If you seal under the rails, it won’t leak. I used this and was successful.

$11 MAGZO Weather Stripping Door Seal, 1/4" Wide X 1/8" Thick Adhesive Foam Tape Soundproof Weatherstripping for Windows, 3 Rolls Total 50FT Black

https://smile.amazon.com/gp/product/B06XCGYFLP?ie=UTF8

added it under the rails before installing and under the front. So far the bed has been dry since I installed it last December.

 

Added rear lights, did the intermittent wiper mod, (why this truck didn’t have it is crazy) changed cabin air filter & installed plate to front…

 

That’s the camera mounting spot on the OEM TRD Pro grill

 

Ah yes you are correct, I miss spoke, it’s an ozone machine.

 

Lets see some night shots on those rear light!

 

My first gen tacoma was like that. Wipers were low and high with no control to split the speeds. Low was too slow and high was bat shit crazy too fast.

 

I bought the INNO that comes with t-slot mount. It was only like $120 brand new. The mounting feet are designed for an aero bar, so I had to sand then flat. The bolts that came with it have 1/4 inch shaft but the square head was huge, so I used a bench grinder to trim them until they fit into the Prinsu channel. I could have just gone to Ace and picked up some 1/4” carriage bolts… my whole goal was for the board rack to sit low enough that I don’t have to remove it to park in my garage, and this setup accomplished that.

 

l’ve had beers with Bubbles, we took him for a Hornet ride and he took us out for beers later, he is a blast. Got pictures somewhere.

 

Haha! That's awesome!