What Have You Done To Your 3rd Gen Today?

Did you make those glare shields? They look great! How much light still makes it on the license plate?

I have this, but the shields look like a good option also.
https://www.tacomaworld.com/threads...le-while-in-reverse-dir.707546/#post-25122024

 

Took off the air damn after 6 mo of contemplating. Sitting in the bed in case i change my mind haha

 

https://www.tacomaworld.com/threads/3rd-gen-cheap-easy-license-plate-light-glare-fix.739648/

 

Honestly this mod has been the biggest value per dollar mod I've done on the truck. $7 and I can see behind the truck when reversing way better than without.

https://www.tacomaworld.com/threads/3rd-gen-cheap-easy-license-plate-light-glare-fix.739648/

 

I agree, installed about 2 weeks ago.

 

I was actually contemplating adding some ditch lights onto it and sliders

 

I picked up a good-sized load of scrap cedar pieces the other day. I grill on cedar, also love burning it for the smell.

I didn't take a trailer so I could only get one pallet but it was a damn big pallet. Truck was close to, if not over load between the wood, camper shell, me, and the couple hundred pounds of gear (my phone autocorrected 'gear' to 'heat,' LOL) I keep on the truck.

I've also got roadmaster active suspension system and there was very little sag, if any.

 

Removed the bed stickers today. Wd40 seem to work the best on the glue. Cleaned it with glass cleaner. Still had a little image visible. Polishing compound by hand took care of that. Can't even tell it was there. Air dam is next.

 

be careful of the rear windows if you drive with them down. had my weathertech deflectors in for about 6 months with no problems then both rears fell out at different times

 

Ha Ha, should I?

 

Yes!

 

Nothing too exciting, just put the bed cover back on for winter, after having it off all summer.

 

Fluid filmed for the 2nd winter, undercarriage still looks like new.

 

Here is mine, yes measure four times at least, use tape to see the line you want to cut, error on the side of not cutting too much. You can always go back a trim, I used a razor blade utility knife for the fine tuning. The black trim will cover any opps. Go slow, and good luck.

 

I love that bumper! Added to my wish list.

 

My front camera view doesn’t look like this? What is this sorcery?

 

Yes always delete chrome whenever possible.

 

But this is special chrome.

 

Hit the view button to change it

 

You can always plastidip them if you don’t want it permanent.