What Have You Done To Your 3rd Gen Today?

Putting the cnc to work this week to make a short shell. front half will be water tight enclosed storage and back half will be 2 dog kennels with molle panels. On top will be the rtt that will be below the level on the roof rack to save a little in gas. Going to be a fun project we will see how it turns out.

 

Look like Clazzio

Clazzio Information & Discount Codes | Tacoma World

 

Love the grill. Got a link?

 

THanks man! Ordered directly off Clazzio website.

 

Thank you! I ordered it from McAutoParts. It looks like they are having website issues right now. It was roughly $196 including the lights and TSS sensor. All plug n play.

 

Aha, we were fortunate never to have had an orbiter shot down thanks to skilled door gunners like yourself.

Interestingly enough, space shuttle and space launch was combined into our career field in the mid-nineties after Strategic Air Command was dissolved and the three remaining Missile Wings were handed over to AF Space Command. While I had nothing to do with those programs, the initial phase of technical training for space programs and LGM-30G Minuteman III ICBM was shared. After initial training, troops would be sent down the space program path, the ICBM path, or the SRAM/ALCM (Short Range Attack Missile/Air Launched Cruise Missile) path. Each training path was called a ‘shred’.

 

Get Some!

 

Nice!

Here’s mine:

 

I’m no youngster, born the last year of the baby boomers, but I got used to it and it’s awesome. Especially off-road being able to see both front wheels, not that I don’t trust my spotter but it’s nice to see what the wheels are seeing.

 

Thanks! Now I’m dizzy.

 

Thanks.

Well this doesn't look promising.

 

Lifted my truck this past weekend 1.5 inch in the front and 1 inch in the rear. For the lift I did the bilstein 6112 / 5100 combo and a 1 inch block for the rear. I didn't want too much of a lift because I plan to stick with the 265 tires. While I was at it I also did the ECGS clamshell bushing and replaced the UCA with the JBA. Overall I am very happy with the results and the ride quality.

 

I just ordered one. Someone needs to take away my Etsy account...

In other news I finally got more electrical tape and finished my front dashcam install. It kind of looks like shit because I used T-taps but it's all tucked behind the rearview mirror so I never notice. I still need to put the rear in but I'll get to that later. For reference it's the Thinkware Q800PRO.

 

@N2DesignsInc Remote start module renewal for 3 years. I really liked the 1year free trial included with the remote start module. Yay, for Jimmy!

 

Impressive, nice work and design.

 

I just hooked them up plug and play. Still debating if I want to wire it up or not.

 

Washed her Saturday then viper cuts Sunday evening cause I was bored (it did not need the clearance lol).

 

Lift this morning. 5100's front / rear, stock springs, icon AAL 1.5", removed the overload bar. Front 5100's set to clip #4.

Honestly drives and feels great. Tires I put on yesterday are 275/70r17's and rubbed at almost any 90° turn in the road and driveways. No more

Before:
20.5 front
21.5 rear

After:
22" front (maybe a hair more)
23" rear

 

The Forester is the only other car I've experienced that is worse at dumping water in during rain. Bought a set of WT deflectors but had to remove them because the windows were too snug to operate.

Is it safe to assume the Tacoma's windows work just fine with the deflectors installed?