What Have You Done To Your 3rd Gen Today?

Will they give you the part to install yourself?

 

If anyone comes up with a part number for this "seal" they install, please let me know.

 

2nd & 3rd gens have the same cab anything that'll fit a 2nd gen cab will fit a 3rd gen and vice versa.
Just beware if the old style OEM roof rack it will hit the 3rd gen antenna. Toyota has since changed the design so the updated version will now fit both.

 

Just ordered bed lights, Kicker tweeters, and Kicker 10in powered amp so hopefully install those soon

 

Installed my c4 hybrid bumper, Baja designs squadron sport x4, Baja designs 30in s8 light bar and some SPC uppers. Girl is looking pretty now

 

Made a quick deck that I can pop in and out for the dogs or revert back to seats for passengers.

Finally put in the 2Lo mod that I bought months ago before my truck was even allocated. Ha.

Getting over my broken ribs...good to get a few things off the checklist. Now I need to get out and finish my fall yardwork that I've neglected for three weeks.

 

They would not do the 3rd brake light unless I removed my shell.

 

I asked mine and was given a no.

There is a pdf of the proper procedure floating around… the pdfs/install instructions always list part numbers at the beginning

 

Effing forklift was too tall for the garage. So, tomorrow we use a skid steer to work the hammer to its final resting place.

 

READ BEFORE CREATING YOUR OWN NARRATIVE!!
Picture 1-3 happen July 5, 2021 and left a hole in my heart. When I found out the insurance was totaling it, the body shop guy said "If it ain't screwed down, take it... and if it is screwed down try to take it anyway." I'm glad I did. Picture 4-8 are of my the new boy that I preference requested on July 26th, and it arrived on Nov 2nd. It's 2 trims up (and 2020 up to 2022) from the one I lost (otherwise identical). I saved the Predator tube steps, all-weather mats, and the rubber bed mat from my previous. I switched out the carpet mats with the all-weather and put the bed mat in (the new one didn't come with it). I will think of them as mementos from the truck that's life was to short. RIP Gossamer-the-truck! Me and Gossamer-2.0 will never forget you!

 

That's awesome. Best labor saving device a blacksmith can have.

 

Sucks but shit happens.

 

This happened today!

 

Im glad that you have everything settled. I bought my MT truck from first team as well. They didnt hike up the price they stayed true to at least the sticker. We need to do a Tidewater VIRGINIA get together!

 

Built up a coastal off-road bumper got it installed.

 

Update, that expedition essentials papertowel holder is pretty cool

 

Installed LED headlights on my Access Cab

 

The Blue Sea packaging has a template. I traced it with a pencil on to the front of the cubby door, drilled a pilot hole and freehanded it with a cordless jig saw. The power panel has a gasket and the lip overlaps the actual opening so it doesn't matter if you're not super precise.

The cubby has a bunch (like 6 or 9) of slots for ventilation/draining and the front three are used for the prongs from the door to drop down into.. I had to trim about 1/4" off one of the prongs to make room for the wiring to come through. I globbed some black silicone on the bottom slots to keep water/road grime out of there and will try to seal up the top ones with some butyl tape depending on how the latch prongs interact.

Cut out the inner part and the panel overlaps it, super easy

 

Sweet!

 

Outside the box thinking to use a tire /wheel assembly as the flywheel!

I like it!