1st Gen Lunchtable Thread - General Discussion

Ok see why can't I get 6500 for the 4runner then

 

I don’t see what’s wrong with the axle

I feel like it’s probably just the bed bent out of shape

 

Could be. Just something about the fitment would make me want to take a closer look.

 

Since you crossed those two out, I assume you've got an 80 series for me?

Everything listed is easy to do, just don't have the space to do it at the moment.

 

It can identify as an 80 series if you ask it nicely

 

I haven't seen your 4R, but I was getting offers at 12k for mine.

Could be the mileage and condition...

 

I'm sure it's the lack of 4x4 and the mileage # is scary, despite the fact I've taken care of basically everything major that would be a problem on competing listings. Eventually the head gasket will go, but from experience that seems to be a relatively even probability distribution anywhere between 150k and 500k. All that's left is a couple cosmetic pieces missing, the sunroof retractor, and rear seat belt retractor needs rewinding

https://www.tacomaworld.com/threads/1999-4runner-limited-fs-arizona.742495/

 

Ahh didn't realize; easy to 4x4 swap but yeah could be that it's lacking that really drops the value.

 

If I could get a pair of 4x4 swap sets quickly, I'd do it to both trucks. But didn't you say when swapped there's kinda some corners you have to cut (like pinching a vacuum line or something)?

 

I didn’t know they made 2WD 4Rs

 

Pretty sure they're more common actually

 

Nope, no pinching or anything I recall.

 

Pretty sure James had a 2WD.

 

You're probably referring to the clamping of the front diff if using an ADD diff tube with manual hubs.

 

I’m about to buy the shitbox to end all shitboxes

 

Sell to @JKO1998 as a house

 

Now that’s just plane wrong

 

C'mon now, it's ok to 1-up those krafty karens who turn old buses into RVs

 

No