Longtime Lurker

Hey guys, been reading a lot on here over the past year, but I figured I should participate.

I've had my 2020 off-road for a little over a year now.

Mods:
Icon stage 2 suspension
snug top rebel topper
Prinsu racks cab and topper
method 305 (17")
Upgrading leaf pack this week to icon rxt stage 3

 

Welcome to TW!

 

Welcome to TacomaWorld

 

Welcome to the forum

 

Let me know that leaf pack goes. Mine should be shipping soon and need them on option 3. I have lots of weight; front and rear steel bumpers, winch, rock sliders, camper top, off roading gear, etc and I’m beginning to squat. Current rear configuration is a head strong 3 leaf progressive AAL with my over load in.

 

Clean Tacoma!!!

 

thanks my man!

 

installed stage 3 today. almost finished with the install and will update with lift specs and pics. They ship stage 1, with an extra leaf that needs to be added to the pack. So you have to dissisemble the entire pack, add the new one, and then reassemble with C clamps. I must say, spending the extra money on Deavers or another pack that is pre-assembled sounds nice when you're trying to align all the leafs back together.

 

sounds good! I

As long as it’s right the first time you do it. My 1.5” AAL didn’t quite give me what was advertised so I had to rip it out, drill out the brackets so I could add my over load leaf back in. It’s been ok but definitely stiffer then I expected. Now that I’ve added more then 600lbs, it’s time to upgrade.

 

@nwflsr4x4 photos of the icon rxt leaf pack install with specs here

 

Looks good! I think I’m going to go ahead and do the 1/2” block on the drivers side to compensate for the taco lean in the rear.

 

Yeah man that's not a bad idea. I read on here some guys setting driver's side to stage 2, and passenger to stage 3 because of that, but I feel like a 1/2" block is more precise.