1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

bolt placement for rear view mirror

Discussion in '1st Gen. Tacomas (1995-2004)' started by washoe, Nov 9, 2021.

  1. Nov 9, 2021 at 9:15 PM
    #1
    washoe

    washoe [OP] New Member

    Joined:
    Nov 9, 2021
    Member:
    #381758
    Messages:
    3
    Gender:
    Male
    First Name:
    Gabe
    Vehicle:
    97 Tacoma standard cab
    Lift, arb front bumper, custom rear bumper, lighting, custom switch board, painted stock wheels, cold air intake, headers, more…
    Looking to get the measurements for the rear view mirror in a 1st gen tacoma with the dual dome lights, I’m need the measurements of the placement of the bolts and the dimensions of the base that is bolted to the roof
    Thank you for the help!!!
     
  2. Nov 10, 2021 at 7:23 AM
    #2
    Bivouac

    Bivouac Well-Known Member

    Joined:
    Sep 5, 2021
    Member:
    #376253
    Messages:
    11,580
    Northern Lehigh Valley Pa
    Vehicle:
    2000 Tacoma 5 speed 3.4
    Remains to be seen I bought the tires and wheels the rest came along
    Welcome to the Forum !

    Your swapping to the map light mirror from the plain mirror so you have nothing to measure ??

    If I had time I would be glad to remove the mirror and look maybe someone has the ready access to one and can post before I can pull mine all apart.
     
  3. Nov 10, 2021 at 7:40 AM
    #3
    washoe

    washoe [OP] New Member

    Joined:
    Nov 9, 2021
    Member:
    #381758
    Messages:
    3
    Gender:
    Male
    First Name:
    Gabe
    Vehicle:
    97 Tacoma standard cab
    Lift, arb front bumper, custom rear bumper, lighting, custom switch board, painted stock wheels, cold air intake, headers, more…
    I’m hoping to 3D print a mount that goes under the mirror mount and holds some switches
     
  4. Nov 10, 2021 at 8:14 AM
    #4
    Bivouac

    Bivouac Well-Known Member

    Joined:
    Sep 5, 2021
    Member:
    #376253
    Messages:
    11,580
    Northern Lehigh Valley Pa
    Vehicle:
    2000 Tacoma 5 speed 3.4
    Remains to be seen I bought the tires and wheels the rest came along
    If that is the case why not just go with your own custom design .

    As everything needs to be removed to to install the wiring.
     

Products Discussed in

To Top