What Lift Kit Should I Get?

Nice

Never knew they offered a leaf pack, I know they offer an AAL.

Edit: I looked, maybe they discontinued it? No leaf pack.

 

Yeah see, you're in the 1st Gen section....recommending parts to a 1st Gen owner.

 

https://exitoffroad.com/product/dob...-kit-for-2005-to-2020-tacoma-4x4-double-cabs/

 

Meh, parts is parts.

 

If they don't fit, parts are instead paperweights.

 

If they don't fit, buy a 2nd gen.

 

Hey now! I had a 2001 double cab, but then I upgraded.

 

I thought only 3rd Genners acted like 3rd Genners

 

Come on Marine, I'm just messin' with you guys and avoiding work.

 

Shitty reason to downgrade IMO.

 

It had 200k on it and the head gasket blew so it was time.

 

Buy the bolt on tons and 40 with triple bypass and dual spring rated coilover

 

Add the plug n play lockers; it's a drop-down add from most vendors nowadays.

 

AMEN

 

We found 30-40mph to work well but I almost flipped the truck trying to go 50mph. The rear end wanted to come around and the worst part was that the brakes didn't help to slow it down. We were lucky that there was no curve in the road.

 

I recommend the Tundra brake upgrade and ensuring your LPSV/BPVV whatever the rear proportioning valve is adjusted correctly to ensure your brakes aren't applying way too heavy on the rear causing the slide out.

 

It's hard to adjust the LPSV when considering the fast up and downs of wash board roads plus extra carry weight in the back. Probably better off getting an aftermarket one to set and forget when the need arises.

 

Those just clamp on to the axle housing, right?

Or are you talking about the ones that mount with double sided foam tape?

 

I mean if you wanna get fancy, sure.

I just used the wire tie from a cheap loaf of bread.