Flatbed install - Aftermarket LED Tail Light Question

Evening Tacoma World!

I have replaced my bed about 6 months ago with a UTE Tray. I made a custom bumper and tossed some Amazon LED lights on to replace my OEM LED tail lights.

Everything has been working perfect until I started to get "Fast Blinker". It seems to come and go but has been sticking lately.

I installed a "Flasher LED Relay" and the blinker still flashes quick plus tries to follow the OEM sequential turn signal pattern.


Any advice or suggestion? Thanks

Pictures:

 

Put another set of LED turns on, or an incandescent light. Or you can use a simple resistor.

You need more load on the circuit. More lights can do it or just a resistor to throw some energy away and make more load

 

The original relay flasher (non_LED type) is still inside the Combination Meter.
In what location did you add the additional flasher relay?

 

The MESO resistor kit (10 ohm 25 watt) can be used with other setups, just need to manually attach the wiring. Maybe that would work for your situation?

https://mesocustoms.com/products/total-tail-load-resistors

 

It looks like those would work. I purchased some sylvania load equalizers from the local auto parts store. They work perfect.

Thank you! Working perfect.