How to: Deleting ADD system

I totaled everything up it is right at $400. Like I said, it's already assembled and ready to bolt on. even has new mounting bolts that go through the tube to the frame. Let me know.

 

I PMed you Howellj1

 

spent about $400 for all the parts, really well documented. I just finished, now onto the FJ t-case.

 

Would the black Toyota FIPG suffice as a replacement to the "right stuff" gasket maker? Have an unopened tube laying around

 

No, the black toyota FIPG is for oil pan, not differential fluid. You should be using the toyota FIPG (orange) 00295-01281 or Three bond 1281 which is resistant to gear oil and higher heats.

https://threebond.com/products/sealants/silicone-rtv

 

Thank you, @6 gearT444E . I have the orange one as well so I'll use that

 

Finally did this. Why didn't I do this sooner!!?

 

One of the best modifications you can do to these trucks IMO. No more mysterious "4x4 flashing" lights, the 4wd system engages any time you need it reliably for many many years to come.

 

Before I head on to the installation, do you need to add any grease to the intermediate shaft?

 

Nope. It gets covered in gear oil

 

This stub shaft can suck a left nut

Edit: sledgehammer + flathead

 

Still need this? It came out

 

Yes. Oil slinger.

 

Thank you. Learning so much from this site. Now time to unfuck it up lol

 

Test drive on the pavement went well, can’t wait to test on the trail!

 

Hell yeah dude!!!!

 

Hoy there! I've been a long time lurker, and finally signed up. I never thought of it, but someday it will be helpful.

Anyone went to delete ADD and ditch the 4WD control unit? I actually need to replace my burnt 4WD control unit if anyone have a spare? The part number on the sticker shows 89533-04020.

 

The alarm guy splice the 12v wire to the sensor ground wire and where the pins connected looks like its melted. I don't know what his doing, he said that was the door relay... smh.

 

Wouldn't that mean he owes you one??