Shop Time w/T.W. Friends

Anyone know the approximate bolt spread center to center of the flange at pinion...Tacoma? Doesn't have to be diagonal and just need approximate if anyone is able to throw a tape measure on there. I want a bar to hold the flange a little whilst I rattle it off and on. Pinion seal replacement. Just need approximate because I'll drill one hole and slot the other. Thanks in advance

 

Grabbed my tape and went out to measure mine, forgot I drove the duramax today

 

Other three rims are hacked up.

 

Boss ordered these back in May. They brought them two months ago, they were too wide so he sent them back. They are right this time, expensive mess up for someone. They’re 15’ long X 2’ wide.

 

I actually bought one of these not too long ago.

 

Should fit now! I remember that.
Thanks for attempting to check that bolt distance for me. I can get the measurement tonight but just thinking I may have time this afternoon to make it. Right now about to go inspect a bunch of wire rope slings for a large pick come first week of December.
I think a few Kevlar slings too..

 

needs more bacon bits!

 

This is always fun. Your hands get dirty, but you get to sit on your ass for awhile.

 

More fun with signs!



These 2 piles are less than half for the entire building and I still need to print and cut paper inserts for all of them.

At last count, not including rooms that I know I've labeled multiple times (or when I had to redo an entire building because they renamed it), I've made about 7,000 of these things.

 

Why this guy got different hole spacing?

 

Nice catch.

Some of the frames were removed from a building we demolished to make room for the new building.

 

Another miniature blade coming.

 

The real one.

 

Not sure what the other place did different but they look good. Obviously more heat for sure.

 

Can always ask

 

I know they aren’t using an Econo Tig with a 20% duty cycle. They’re using a Syncrowave with a water cooled torch with twice the amperage

 

Looks like they preheated the donut with the straw color it's showing now.

 

Confirmed, they did pre heat them. Our tig just doesn't have enough amps to weld thick stuff.

 

Parts for some sort of form roller. The bigger round pieces are hard as a rock. The rest is worn out