FS: DDI Front Seat Multi-Mount Panels (Molle Panel) 2nd

Not sure I understand the question, are you looking for the height on the Multi Mount Panel itself, height of Seat Jackers, or ?

 

sorry about the height of the multi-panel so from the mounts (nonseat jacker) to the top. Need to see if it clears. I like the idea but had no use for seat jackers.

 

Gotcha. Just a hair over 2.75". This measurement is the height of the MMP when mounted with brackets.

Keep in mind the brackets are angled down to match the contour of your front seat mounts, so when measuring for clearance, measure from the front edge of the seat rail.

Hope that makes sense.

Steve
DDI

 

Make sense and that's what I had in mind. thanks

 

Does this fit with Weathertech floor mats?

 

About to install an MMP with a fire extinguisher when I realized I need some hardware to mount it up. Any chance you can share what size the slots are in the MMP and add to your website? Thanks!

(Yes I realize this is a slightly dumb question because I can go to the hardware store and figure it out, I'm only asking because not everyone has a hardware store nearby and/or might want/need hardware that needs special ordering.)

 

If you are using our Fire Extinguisher Mount then the hardware should have been provided. Let us know if you are missing it and we will get it shipped out right away.

If you're using a different mount, we use M6 Hardware. The slots are .26" tall and 1.45" wide so a 1/4-20 bolt will also work (don't forget some washers).

 

ah just about to pull the trigger on this, any cool discounts or promotions going on? before i order up? tired of my fire extinguisher banging around my floorboard.

UPDATE**
well, ordered it last night, so hopefully soon I will have it all mounted up and clean up at least one side of my truck floor.

 

Thanks very much for sharing the specs! I got everything mounted using (2) M6-1.0x16mm button hex head bolts and (2)

$9 M6-1.0 M6 Black Acorn Cap Nuts, Stainless Steel 304 (18-8) Black Coating Acorn Nuts, 20Pcs-Pack

M6-1.0 flange nuts. Great products and customer service as usual, cheers!

 

thank you for showing this! i was worried my bottle extinguisher, was going to need all sorts of special extra mounting.

 

my panel should be delivered today! I'm excited! spend a few min afterwork getting my bracket set up and no more extinguisher banging around on my floorboard.

what did you end up using to mount your extinguisher though the bracket? wondering if i should make a stop at the hardware store on my way home to grab some bolts and nyloc nuts? any pics before the bottle was attached?

 

From my previous post: "I got everything mounted using (2) M6-1.0x16mm button hex head bolts and (2)

$9 M6-1.0 M6 Black Acorn Cap Nuts, Stainless Steel 304 (18-8) Black Coating Acorn Nuts, 20Pcs-Pack

M6-1.0 flange nuts."

Also see the previous post by @EasyDoesIt about specs for the slots and appropriate hardware.

Edit: I missed the part about photos before the bottle was attached. No unfortunately I do not have those. The H3R extinguisher comes with a latching bracket, if you have a different extinguisher your mileage may vary.

 

Spring savings for DDI friends and family​

We're moving to St. George Utah! Our new headquarters awaits, and we're sharing the news with you first.

Spring cleaning at DDI means big savings FOR YOU! As a THANK YOU to our VIPs, we're giving you early bird access to our Spring Sale.

We're offering 10% off a week ahead of everyone else. All you have to do is enter discount code JACKEDFORSPRING at checkout.

We're getting ready for the big move and want to give you the chance to take advantage...

• Ships FAST, ships FREE
• Fully stocked inventory
• Original designs, more every day
• US based manufacturing
• In-house customer service
• Support small businesses

https://desertdoesit.com


Thank you for all your support TacomaWorld!

Steve
Owner
DDI