What Have You Done To Your 3rd Gen Today?

https://www.tacomaworld.com/threads/3rd-gen-cheap-easy-license-plate-light-glare-fix.739648/

 

Flowers and Tacoma’s are big on the gram now huh?

 

For those that have done an ECGS bushing install, do you recommend also installing a new CV axle seal?

 

Thanks for your support!

 

Take the headlights for example, SR trucks can't buy the LED headlights from a TRD, the connections are not the same.

 

Same here. Been using it for years.

 

I did just because was at it.

 

Hello all.
I ordered these grill lights for my 21 OR4X4.

Q QUNSUNUS Amber Grill Lights - Smoked Amber LED Grille Lights for Toyota Tacoma 2020-2022 (OEM TRD Off Road & Sport) - Plug & Play - 4pcs

https://www.amazon.com/dp/B09FZ6J6KT

I got the lights placed in the grill, and ran the wires. Everything looked great... until...
I closed the fusebox and the hood. When I got into the truck and cranked her up I had the warning ⚠️ light. So I checked everything out and whenever I closed the fusebox, the wire was severed.

Has anyone experienced this? Does anyone have a solution for running that wire into the fuse and not severing it???
Thanks for the help.

 

About to be ordering this same kit. How do you like it?

 

I didn't because it seems as if more people screw up the install and cause a leak.

 

I did front and rear at the same time so it’s hard to isolate how much of the improvement is the rears. I’m very happy with the improvement they both made.

 

Installed auxbeam 8 switch panel. Super clean install and this unit is affordable!

 

Home made rear seat delete

 

Well hell.

 

Looks pretty good for a $107 “lift”
May have to consider this for mine.

 

https://youtu.be/LM-eOlCIwiU

try this video, it covers how to cleanly run the wire into the fuse box.

 

Another quick and easy mod, for fun.

 

Newbie here.

Got rid of the cow catcher, SIMPIN it up with a pro grill, installed kicker speakers, tossed on a tonneau cover and have a rear deck drying and ready to toss In Hopefully tomorrow

also have a pioneer head unit I’ll try to get to tomorrow then window tint this weekend.

 

@Puppypunter can make you an SR trim level conversion harness for the factory LED headlights.

https://www.tacomaworld.com/threads/sr-sr5-oem-led-headlight-conversion-harnesses.720866/

 

Started the seat heater harness (drivers side) install. I redid the harness length and connectors (on-site finalized) and removed the broken panel on inner seat so I didn’t have to remove the seat again. Maybe tomorrow I’ll get the rest ran up to the overhead